Muratec F-360 manual Using speed-dial numbers, Entering or changing a speed-dial number

Advanced features

Using speed-dial numbers

Your fax machine will store up to 244 speed-dial numbers, designated by three-digit identifier codes from 001 through 244.

Entering or changing a speed-dial number

1 Press MENU, 1, 2, 0, 1, ENTER. The LCD shows:

	Note: If a speed-dial number other than 001 appears on the LCD, it means
		you have already entered a number for 001.
2	Using the cursor key, select the speed-dial number in which you want to store
	a number or change a previously stored number.
	Note: You can select the speed-dial number by directly entering that three-
		digit identifier code. When entering the identifier code for speed-dial
		numbers less than 100, you must enter leading zeroes to make three
		digits. For example, 001-099.
3	Press ENTER. The LCD shows:

4	Use the numeric keypad to enter the number exactly as your machine should
	dial it, including whatever access codes your phone system requires. (You may
	want to review “Special dialing characters,” page 3.1.) The number can be up
	to 40 characters in length:
	Your LCD can show only 30 characters at a time. To view characters beyond
	those 30, press to scroll to the left or to scroll to the right.
5	When the number is as you want it, press ENTER to store it. The LCD now
	shows:

6 Select “Location” and press ENTER. The LCD shows:

	Note: If a Location ID is already registered in this one-touch key, it is shown
	on the LCD. If you wish to change the location ID, press CANCEL to
	erase it and then enter another location ID.
7	Enter the Location ID. (Regarding how to enter the character, see “Entering
	character” on page 1.12.) A number’s Location ID may be up to 24 characters
	in length.
8	Press ENTER to save the setting.
9	Select “Exit” and press ENTER.
	The LCD will display the next empty speed-dial number.
	If you do want to enter another speed-dial number, go back to step 2.
	If you do not want to enter any more speed-dial numbers, press STOP to finish.

Erasing a speed-dial number

1 Press MENU, 1, 2, 0, 2, ENTER. The LCD shows:

2 Select the speed-dial in which you want to erase.

Note: You can select the speed-dial number by directly entering that three- digit identifier code. When entering the identifier code for speed-dial numbers less than 100, you must enter leading zeroes to make three digits. For example, 001-099.

3 Press ENTER. The LCD shows:

Important: If you want to quit without erasing the speed-dial number you’ve selected, press [No]. The fax will return to step 2.

3.4