Muratec F-360 manual Using one-touch keys, Entering or changing a one-touch number

Advanced features

Using one-touch keys

Your fax machine stores up to 56 one-touch numbers using the keys marked 01–56.

Entering or changing a one-touch number

1 Press MENU, 1, 1, 0, 1, ENTER. The LCD shows the empty one-touch number:

	Note: If a one-touch number other than 01 appears on the LCD, it means
		that you have already entered a number for 01.
2	Using the cursor key, select the one-touch key in which you want to store a
	number or change a previously stored number.
	Note: You can select the one-touch key by pressing that key on the control
		panel.
3	Press ENTER. The LCD shows:

4	Use the numeric keypad to enter the number exactly as your machine should
	dial it, including whatever access codes your phone system requires. (You may
	want to review “Special dialing characters,” page 3.1.) The number can be up
	to 40 characters in length:
	Your LCD can show only 30 characters at a time. To view characters beyond
	those 30, press to scroll to the left or to scroll to the right.
5	When the number is as you want it, press ENTER to store it. The LCD now
	shows:

6 Select “Location” and press ENTER. The LCD shows:

	Note: If a Location ID is already registered in this one-touch key, it is shown
	on the LCD. If you wish to change the location ID, press CANCEL to
	erase it and then enter another location ID.
7	Enter the Location ID. (Regarding how to enter the character, see “Entering
	character” on page 1.12.) A number’s Location ID may be up to 24 characters
	in length.
8	Press ENTER to save the setting.
9	Select “Exit” and press ENTER.
	The LCD will display the next empty one-touch number.
	If you do want to enter another one-touch number, go back to step 2.
	If you do not want to enter any more one-touch numbers, press STOP to finish.

Use the autodialer labels in your fax’s packaging to write down the stored numbers for easy reference.

Erasing a one-touch number

1 Press MENU, 1, 1, 0, 2, ENTER. The LCD shows the one-touch number you have already entered:

Note: If the one-touch number that appears is other than 01, it means that 01 is empty.

2 Select the one-touch key you want to erase.

Note: You can select the one-touch key by pressing that key on the control panel or using the cursor key.

3.2