Muratec F-360 Erasing a call group, Send a fax via call group, Printing a call group directory

6 The LCD will display the next empty group number.

If you do want to enter numbers for another group number, go back to step 2. If you do not want to enter any more numbers, press STOP to return to standby mode.

Erasing a call group

1 Press MENU, 1, 3, 0, 2, ENTER. The LCD shows:

2 Using the cursor key, select the group number you want to erase.

Note: You can select the group number by directly entering that two-digit identifier code. When entering the identifier code for group numbers less than 10, you must enter leading zero to make two digits. For exam- ple, 01-09.

3 Press ENTER. The LCD shows:

Important: If you want to quit without erasing the group number you’ve selected, press [No]. The machine will return to step 2.

4 Press [Yes] to erase the number.

To erase another group number, repeat steps 2–4. Otherwise, press STOP to return to standby mode.

Send a fax via call group

Note: The call group dialing can be used only with memory transmission.

1 Place the document in the ADF. Adjust resolution and contrast if necessary.

2 Press SPEED DIAL/GROUP twice.

Advanced features

3 Use the numeric keypad to enter the group number you want to send a fax. Note: If you want to send a fax to several groups at a time, press BROADCAST

then repeat steps 2–3. Also, you can include the one-touch location, speed-dial location and up to 30 manually dialed number. (See “Broadcasting,” page 3.9.)

4 Press START.

Printing a call group directory

Your machine can also print a call group directory. This lists all your stored autodialer numbers by Location ID and lists the groups to which these numbers belong.

The directory divides the call groups into four banks, 01–09 (the list shows 00), 10–19 (the list shows 10), 20–29 (the list shows 20) and 30–32 (the list shows 30). If you spec- ify call group 0 (which puts the number in all call groups), the directory shows all numbers (see below).

For example, the directory might show:

	No.	Location			00			10			20		30
[01]		Carson Co		4		0	4
	[02]	Tex. Ofc.	1
	[03]	e.e.gummi							0			2
	S001	And Sew I		2 4
	S002	KC Enterp		7		0			1
	S003	Katz Cat	1	234567 89		0	123 456 789		01	23456789		012

In this list, one-touch number 01 ([01]) is in groups 4, 10 and 14; one-touch number 02 ([02]) is in group 1; one-touch number 03 ([03]) is in groups 20 and 32; speed-dial number 001 (S001) is in call groups 2 and 4; speed-dial number 002 (S002) is in groups 7, 10 and 21; and speed-dial number 003 (S003) is in all groups, 1 to 32.

To print a call group directory, press MENU, 5, 1, 0, 7, ENTER.

3.7