Muratec F-360 manual

5 Use the numeric keypad to enter the number exactly as your machine should dial it, including whatever codes your phone system requires. The number can be up to 40 characters in length:

Your display can show only 30 characters at a time. To view characters beyond those 30, press to scroll to the left or to scroll to the right.

6 Press ENTER. The LCD now asks which operation you want to program into the programmable one-touch:

7 Select “Delayed Transmit” and press ENTER. The LCD shows:

8 Tell your fax to carry out this delayed command one of these ways:

Option 1: Perform the command once at a certain time on a certain day of the month. (For example, “Do this at 5:05 PM on the 30th.”)

To select this option, use the numeric keypad to enter the date and time when the fax should perform the command:

Option 2: Perform the command at a certain time each day you press the key. (For example, “Do this at 5:05 PM today.”)

To select this option, use the numeric keypad to enter 0, 0 and then the time the fax should perform the command:

9 Press ENTER.

Advanced features

10 Select “Exit” and press ENTER. The LCD shows:

The LCD asks if you want to make option settings which includes; resolution, contrast, memory transmission, report, cover page and Fax & Copy. If you want to make any of these settings, select ON using the cursor key.

11 Press ENTER.

If you select ON, proceed to step 12. If you select OFF, skip to step 16.

12 The LCD shows:

13	Using the cursor key, select the setting you want to specify for this program-
	mable one-touch number. Then press ENTER.
14	Using the cursor key, select the mode you want. Then press ENTER.
	If you want to make another setting, repeat step 13 and 14.
	Note: Choose “-----” if you do not want to specify for this programmable one-
	touch key.
15	Select “Exit” and press ENTER.
16	Press STOP to return your machine to standby mode.

3.39