5 Press ENTER to save the PIN.

Note: If you press ENTER without entering the PIN, the fax machine beeps, indicates “Invalid Number” on the LCD and then returns to step 4.

Now you may autodial the number as usual.

Important: While in PIN Mode 1, any autodialer numbers you use must include the PIN. This also applies to autodialer numbers used with batch transmission (see page 3.12) or programmable one-touch keys (see pages 3.38–3.45).

Note: If you select either Mode 1 or Mode 2 and will be using batch transmission, you must store the PIN access code for the remote unit within the appropri- ate batch box.

If you chose “Mode 2” — as you autodial, load the code

In this mode, you don’t have to add the PIN to the autodialer setting. Instead, you enter the PIN manually each time you autodial:

1 Dial the number as you normally would, using the autodialer. Here, we’ve pushed one-touch key 01. The machine now asks for the PIN.

2 Use the numeric keypad to enter the PIN.

3 Press START. Your machine dials the number.

Note: If you select either Mode 1 or Mode 2 and will be using batch transmission (see page 3.12), you must store the PIN access code for the remote unit within the appropriate batch box.

Advanced features

Dialing from the numeric keypad while using the PIN mask

If you’ve specified Mode 1 — use “star” power

1 Enter the phone number, then press the * (“star”) key and enter the PIN.

The PIN always goes last. For example, to dial 19725550911 with a PIN of “123456”, enter 19725550911*123456:

2 Press START. The PIN disappears from the display, and your machine dials the desired phone number.

If you’ve specified Mode 2 — the machine guides you

1 Enter the phone number as usual.

2 Press START. The LCD shows:

3 Use the numeric keypad to enter the PIN.

4 Press START. Your machine dials the number.

3.49

Page 96
Image 96
Muratec F-360 Dialing from the numeric keypad while using the PIN mask, If you chose Mode 2 as you autodial, load the code