3 If necessary, select desired resolution, contrast, reduction ratio.

4 Press START to begin the copying process.

Memory overflow message

If you’ve stored too much information in your machine’s memory, a “Memory Overflow” message may appear on the LCD.

If the memory overflow occurred at the first page:

Press STOP to discharge the documents from the ADF.

If the memory overflow occurred at the second page or later:

If this message appears, press [Yes] to tell your machine to print out the document stored in memory, or press [No] to erase all pages stored during the current opera- tion (but not previous operations).

Note: If you don’t operate your machine within 60 seconds, the machine will auto- matically print out the document stored in the memory during the current operation.

If the paper runs out while copying

When your machine runs out of paper, it beeps, the ALARM light glows and the LCD shows which source has run out of paper – the 1st cassette, 2nd cassette (optional) or the bypass tray.

In this example, the machine runs out of the paper in the 1st cassette:

Basic operation

If you want to cancel the current copying job, press STOP. Otherwise, supply the paper to displayed paper source to resume the copying.

2.11

Page 44
Image 44
Muratec F-360 manual If the paper runs out while copying, If the memory overflow occurred at the first