Muratec F-360 manual Fax dialing with programmable one-touch, Erasing a programmable one-touch key

13 The LCD will shows:

14	Using the cursor key, select the setting you want to specify for this program-
	mable one-touch number. Then press ENTER.
15	Using the cursor key, select the mode you want. Then press ENTER.
	If you want to make another setting, repeat step 14 and 15.
	Note: Choose “-----” if you do not want to specify for this programmable one-
	touch key.
16	Select “Exit” and press ENTER.
17	Press STOP to return your machine to standby mode.

Fax dialing with programmable one-touch

To dial a fax call using a programmable one-touch number:

1 Set your document in the ADF.

2 Make any necessary adjustments as usual.

3 Press the programmable one-touch key in which you’ve stored the fax commu- nication command.

Your fax will perform the operation now, or at whatever time you programmed.

Note: To review the details of each operation, review the instructions for that operation. See page 3.38 for a list of each operation and where to find it.

If you programmed this key to delay its operation, the LCD shows:

�

If you programmed this key to perform the operation immediately after you press it, the LCD shows the number:

�

Advanced features

Printing a list of your programmable one-touch keys

You fax machine can print a list of the commands you’ve stored in your programma- ble one-touch keys.

The list includes:

(1)each key’s one-touch number

(2)the fax/telephone number

(3)when the command should start

(4)which command you’ve selected

(5)if applicable, the selected call group(s) or F-Code box(es) you’ve stored in the key

(6)the individual settings for each key

To print a list of programmable one-touch keys, press MENU, 5, 1, 1, 1, ENTER.

Erasing a programmable one-touch key

1 Press MENU, 3, 4, 0, 2. The LCD shows:

2 Select the programmable one-touch key you want to erase.

Note: You can select the programmable one-touch key by pressing that key on the control panel.

3 Press ENTER. The LCD shows:

Important: If you want to quit without erasing the one-touch number you’ve selected, press [No]. The fax will return to step 2.

4 Press [Yes] to erase the number.

To erase another program one-touch number, repeat steps 2–4. Or press STOP to return to standby mode.

3.45