Muratec F-360 manual Printouts have irregularities, Printouts have white and/or black lines

Just in case …

	Printouts have irregularities
ABCDE	• The paper you’re using may have absorbed moisture, per-
ABCDE	haps due either to high humidity or water having been
	spilled on the paper supply. Toner will not adhere well to
ABCDE	wet paper.
ABCDE	Replace the paper with dry paper and try printing again.
ABCDE

	Printouts have white and/or black lines
ABCDE	• The toner cartridge or drum cartridge may be defective.
ABCDE	Remove the cartridges and check them for damage.
	If the problem persists, replace either or both of the car-
ABCDE	tridges as indicated.
ABCDE	• The LED print head may be dirty.
ABCDE	Using the cleaning paper, gently clean the LED print head.
	• The charger may be dirty.
	Your machine normally cleans the charger automatically.
	If other solutions fail, please contact your authorized
	Muratec dealer.

	Printouts have toner smudges
ABCDE	• The toner may be unevenly distributed inside the toner
ABCDE	cartridge.
	Remove the toner cartridge and shake it a few times to
ABCDE	redistribute the toner inside. If the problem persists, replace
ABCDE	the cartridge.
	• The toner cartridge or drum cartridge may be defective.
ABCDE
	Remove the cartridges and check them for damage. If the
	problem persists, replace either or both of the cartridges as
	indicated.

•If you find smudges on the back of the printouts, the trans- port roller may be dirty.

Your machine normally cleans the transport roller automat- ically. If other solutions fail, please contact your authorized Muratec dealer.

	Printouts have white spots
ABCDE	• The charger may be dirty.
ABCDE	Your machine normally cleans the charger automatically.
	If other solutions fail, please contact your authorized
ABCDE	Muratec dealer.
ABCDE
ABCDE

5.4