Muratec F-360 manual If you chose Relay

34 Select “Erase Tx Doc” and press ENTER. The LCD shows:

Erasure of transmitted documents tells your machine if it should erase a docu- ment from the box after a caller retrieves (polls) the document.

ON: Your machine erases the document from the box as soon as it sends it. If you choose “On”, this box can be polled only once per document.

OFF: Your machine does not erase a document from the box when it’s polled. As long as your machine holds AC power and you do not erase the docu- ment from the box, the document is available indefinitely for polling.

35 Using the cursor key, select the mode you want. Press ENTER and skip to step 46.

If you chose Relay:

36 The LCD shows:

37 Enter the box name, the sub-address and the password for the F-Code box as described in steps 8-17.

38 Press ENTER. The LCD shows:

39 Select “Location” and press ENTER. The LCD shows:

Enter the fax number using a one-touch key, a speed-dial number or a call group number. You cannot use the numeric keypad to enter these numbers. You can specify up to 300 numbers for a remote unit.

Advanced features

Note: If you want to review the numbers you entered, press [Review].

If you want to erase any number, move the cursor on it and press [Erase].

When you finish to review, press [Return] to return to the previous display.

40 Press ENTER. The LCD shows:

41 Select “TTI Type” and press ENTER. The LCD shows:

The machine asks for the type of TTI you want to appear on the faxes that are relayed to other callers.

•Sender — Relay the document with sender unit’s TTI (don’t send your TTI).

•Both — Relay the document with both the sender unit’s TTI and your TTI.

•Yours — Relay the document with your TTI instead of the sender unit’s.

42 Using the cursor key, select the mode you want.

43 Press ENTER. The LCD shows:

3.31