Redialing

Automatically fax redialing

If your fax call fails, your machine automatically redials it. In this Auto Redial mode, your fax automatically redials the number up to two times at one minute inter- vals.

Note: You can change the redial time and interval settings. (See “Changing redial settings,” page 4.5.)

While in the Auto Redial mode, “AutoRedial” appears on the upper right of the LCD, and the machine can continue to receive faxes and can make as many as 99 fax transmissions.

Note: If you used either the MONITOR/CALL key or a handset to dial the call, you must redial manually (see below).

Note: If the last redial attempt fails, your machine may print (and/or display) error messages.

Redialing manually

You can always redial calls manually. And you must redial manually if you used either the MONITOR/CALL key or an optional handset to dial the failed call.

To redial a fax call manually without using the MONITOR/CALL key or an optional handset:

1 Set the document and set the resolution and contrast.

2 Press (REDIAL). The LCD will show:

3 Your machine can remember the last 10 dial numbers. Press or until the dial number you want to redial appears.

4 Press START.

Basic operation

To redial a fax call manually with the MONITOR/CALL key or an optional handset:

1 Make sure the document is in the ADF and that the resolution and contrast are set.

2 Press MONITOR/CALL or lift the optional handset to get a dial tone.

3 Press (REDIAL). The LCD will show:

4 Your machine can remember the last 10 dial numbers. Press or until the dial number you want to redial appears.

5 When you hear fax tones from the remote unit, press START.

Note: If a person answers the phone, use the optional handset to tell that person you’re sending a fax. When you hear fax tones, press START.

To redial a voice call manually using the optional handset:

1 Lift the optional handset to get a dial tone.

2 Press (REDIAL). The LCD will show:

3 Your machine can memory the latest 10 dial numbers. Press or until the dial number you want to redial appears.

4 Press START.

When the other person answers, use the optional handset to speak to that person.

2.5

Page 38
Image 38
Muratec F-360 Automatically fax redialing, Redialing manually