Muratec F-360 manual Setting ECM, TTI transmission, Default setting on

Changing the default settings

Setting ECM

Default setting: ON.

“Line noise,” or static on the line during a call, can easily disrupt the flow of data from one fax machine to another.

That’s why your fax machine gives you the option of using Error Correction Mode (ECM). When two fax machines communicate while running in ECM, the sending machine automatically checks the data as it sends. If the receiving fax machine can’t verify the transmission, the first machine will re-send it as necessary.

Note: ECM gives you a better chance of transmitting a fax document over a bad phone line, but it could also slow down the transmission time. The worse a line is, the slower the transmission. That’s why the machine lets you turn ECM on or off as needed.

Note: Not all fax machines have ECM. If you’ve activated ECM and then transmit to a fax machine not currently using ECM, there will be no change in the fax transmission from a usual, non-ECMtransmission.

1 Press MENU, 2, 2, 0, 9, ENTER. The LCD shows the current ECM setting:

2 Using the cursor key, select the mode you want. Then press ENTER to save the setting.

Memory transmission

Default setting: ON.

Note: When the machine’s memory is full, it can transmit only through the docu- ment feeder (real time transmission).

To change the default setting of memory transmission:

1 Press MENU, 2, 2, 0, 6, ENTER. The LCD shows:

2 Using the cursor key, select the mode you want.

Then press ENTER to save the setting.

If the MEMORY TRANSMIT light glows, memory transmission is on.

If the MEMORY TRANSMIT light doesn’t glow, memory transmission is off.

Quick Memory transmission

Default setting: ON.

Important: Your fax machine’s memory transmission feature must be turned on to use Quick Memory transmission (see left column).

To change the default setting of Quick Memory transmission:

1 Press MENU, 2, 2, 0, 7, ENTER. The LCD shows:

2 Using the cursor key, select the mode you want. Then press ENTER to save the setting.

TTI transmission

Default setting: ON.

Every fax page you send arrives at the receiving machine with a single line of text at the very top of the page. This text lists a name, called the Transmit Terminal Identifier (TTI), and a fax number. You can set the machine to not send the TTI.

1 Press MENU, 2, 2, 0, 8, ENTER. The LCD shows:

2 Using the cursor key, select the mode you want. Then press ENTER to save the setting.

4.2