Muratec F-360 manual Using a relay box, Erasing an empty F-Code box

Using a relay box

Once your fax machine receives a document via ITU-Tsub-addressing to one of its F- Code relay boxes, it sends it to the other fax machines that you’ve set up on your relay box. (See “Creating or Modifying an F-Code box”, pages 3.28–3.32.)

If you set the Auto print mode to on when you created the relay box, your machine will print the received document, then relay it to the other machine. Otherwise, your machine will only relay it to the other machines, not print it. See “If you chose Relay,” page 3.31 for more details on this setting.

Also, you can send (relay broadcast initiation) the document to another hub machine’s F-Code box and get that machine to relay it to others. See “F-Code trans- mission” on page 3.36 for more detail.

The hub performs a relay broadcast, and the machine which sends the original doc- ument to the hub has performed a relay broadcast initiation.

Erasing an empty F-Code box

An F-Code box must be empty in order to erase it. (If you select an F-Code box in these steps which is not empty, the machine beeps. If this happens, print all docu- ments in that box before erasing it.)

To erase an empty F-Code box:

1 Press MENU, 3, 5, 0, 2, ENTER. The LCD shows:

2 Use the numeric keypad to enter the two-digit identifier number (01-50) of the F-Code box you want to erase.

Note: If the F-Code box is storing any documents, the symbol is appeared on the LCD.

3 Press ENTER. If the F-Code box is empty, the LCD shows:

Advanced features

Important: If you select an F-Code box which is not empty, the machine beeps and, before returning to step 2, briefly displays:

Print any documents received in the F-Code box, then repeat this procedure from the beginning to erase the box. Otherwise, select another F-Code box.

4 Use the numeric keypad to enter the four-digit I.D. code.

5 Press ENTER.

If you’ve entered an incorrect I.D. code, your fax machine rejects the attempt and returns to standby mode.

If you’ve entered the correct I.D. code, the display shows:

�

Note: If you want to quit without erasing the F-Code box you’ve selected, press [No]. The fax will return to step 2.

Note: If you want to quit without erasing any F-Code box, press STOP. The machine returns to standby mode.

6 Press [Yes] to erase the F-Code box.

To erase another F-Code box, repeat steps 2-6. To finish, press STOP.

3.35