Muratec F-360 manual Printing a delayed command list, Printing a stored document, Press Result

If you want to go back to reviewing or canceling other command, press [No].

If you don’t want to cancel any more numbers, press STOP. The machine returns to standby mode.

Printing a delayed command list

Your machine can print a command list which tells you:

•The command’s identification number

•The phone number, or “remote location”

•The start time (this appears in a DD,HH:MM format)

•A “note” telling if the command is a polling or F-Codeoperation (see pages 3.15–3.16 for more on polling and 3.27–3.37 for more on F-Code communication).

To print a delayed command list, press MENU, 5, 1, 0, 4 ENTER.

Printing a stored document

Your fax machine can print out each document stored for delayed transmission. To print a stored document, you’ll need to know the document’s command number, which you can get by either reviewing the commands or printing a delayed com- mand list (see above).

1	Press MENU, 4, 3, 0, 5 ENTER. The LCD shows:
2		�
	Use the numeric keypad to enter the command’s identification number, 01–99.
	For example, we have entered the command number 05:

3 Press ENTER. Your fax machine will print a copy of the stored document.

Basic operation

View the result of fax transaction

You can see 100 most recent fax transactions and result of each transactions with the following information.

•Assigned number, starting each day at 001

•Remote location called (The destination name)

•Resolution mode

•Starting date and time

•Duration, in minutes and seconds

•Number of pages you sent or received

•Result of the call — If preceded by an asterisk (*), this signifies an ECM commu- nication. If preceded by a pound (#), this signifies communication was via the highspeed V.34 modem.

Note: Your machine’s LCD shortens the word Transmission to Tx and the Reception to Rx.

1 Press COMM. CANCEL/CONFIRM..

2 Press [Result].

3 Use the cursor key to scroll the results of each transaction.

Note: You can print a result of the fax transaction appears on the LCD by pressing ENTER.

4 If you wish to exit this mode, press STOP.

Printing all result of daily fax transactions:

If you want to print the all result of today’s fax transactions, press MENU, 5, 1, 0, 3

ENTER.

Note: You can set your machine to print all result of faxing automatically. See “Setting the Activity journal” on page 3.22 for more details.

2.7