Muratec F-360 manual

When the setting is ON, your machine automatically recognizes DST the appropriate switchover Sundays each year.

When the setting is OFF, no automatic change will occur.

8 Using the cursor key, select the mode you want.

9 Press ENTER to save the setting and continue.

10 The LCD now shows the machine’s current reception mode.

4 The LCD now shows the current calendar/clock setting, with a cursor appear- ing on the first digit.

5 Use the numeric keypad to enter the correct date and time, using a MMDDYY format for the date and 24-hourformat for the time. For instance, to set 2:30 PM on September 27, 2001, press 0 9 2 7 0 1 1 4 3 0, which results in:

Note: Your fax machine automatically inserts the spaces and date-slash. All you have to do is enter the digits.

To change a digit, press to move the cursor left, or to move it right. Then enter the correct digit.

6 Press ENTER to save the clock setting and continue.

7 The LCD now asks if you want to set the calendar/clock to automatically recognize daylight saving time (DST).

at 2 AM on

		Getting started
11	For now, select Fax Ready. (This setting can always be changed. We’ll discuss
	reception modes further on pages 2.8–2.9.)
12	Press ENTER to save the setting and continue.
13	The LCD now asks you to enter the type of dialing needed for the fax machine,
	either tone or pulse:

14 Using the cursor key, select the mode you want.

15 Press ENTER to save the setting and continue.

16 The LCD now asks you to enter your fax number as you want it to appear on other fax machines’ displays or printouts. The fax industry term for this number is Subscriber ID.

17	Use the numeric keypad to enter the fax number. The number may contain up
	to 20 characters (numbers and dashes).
	Note: To insert a dash, as shown here, press [ – ]. To insert “ + ” before the
	country number for the overseas call, press [ + ].
	Note: If you make a mistake, press CANCEL to erase to the left.
	To change just one number, press to move left, or to move right.
	Press CANCEL to erase the number. Then re-enter the fax number cor-
	rectly.
18	Press ENTER to save the number and continue.
19	The LCD now asks you to enter the name you want to appear at the top of
	faxes you send. You can enter three of TTI.

Select TTI 1, 2 or 3 using the cursor key.

1.19