Muratec F-360 Settings for dialing, Changing the dialing pause length, Changing redial settings

When you finished the entering number, press ENTER.

Settings for dialing

Changing the dialing pause length

Default setting: 2 seconds.

The pause is set by the factory to last two seconds, but you can set it to last as long as ten seconds if necessary. To change the pause length:

1 Press MENU, 2, 2, 0, 5, ENTER.

2 Use the numeric keypad to enter the length you want for the dialing pause. Note: The length setting requires two digits. Always enter a leading zero for

lengths less than 10 seconds.

3 Press enter to save the setting.

Changing redial settings

Default setting: Number of redial: 2 times, Redial interval: 1 minute.

It’s up to you how many times the fax redials a number and how long it waits between redials (that length of time between calls is the redial interval).

To program the redial settings:

1 Press MENU, 2, 2, 0, 4, ENTER.

2 Using the cursor key, select “# of Redials” and then press ENTER.

Changing the default settings

3 Use the numeric keypad to enter the number of redials you want, from 2 to 15.

Note: Enter a leading zero when entering a quantity less than 10.

Note: Also you can set the number of redials using or .

4

5 Using the cursor key, select “Interval” and then press ENTER. The LCD will show:

6 Use the numeric keypad to enter the length you want between redial attempts. Choose from 1 to 5 minutes.

Note: Also you can set the length between redial attempts using or .

7 When you finished the entering number, press ENTER. 8 To save the setting, select “Exit” and then press ENTER.

4.5