Muratec F-360 Receiving faxes, Answering calls manually, Reception modes, Use it if

Models: F-360

1 142
Download 142 pages 5.86 Kb
Page 41
Image 41

Basic operation

Receiving faxes

Answering calls manually

In any reception mode, you can always answer calls manually if you have an optional handset installed. Just pick it up, as you would if using a normal phone.

If you hear someone speaking to you, use your optional handset to speak back.

If you hear fax tones (“beep — beep — beep”), press START and hang up the optional handset. The fax machine will begin receiving a fax.

Note: Don’t try to answer a call by pressing MONITOR/CALL. The monitor function is for dialing only.

Answering fax calls using another phone, not the fax machine

If you have one phone line ringing to several phones in your office and you have an optional handset attached to your fax, there’s no need to run to the fax machine to answer every call. If you happen to answer a fax call while you’re at another extension, put the handset down, but don’t hang up. Walk to the fax machine and pick up the optional handset. Then press START.

After you press START, hang up both the fax machine’s optional handset and the second telephone’s handset. Because remote fax machines will wait several seconds to hear reception tones from your unit, you have about 30 seconds to walk to your fax, pick up the handset, and press START.

Reception modes

Your fax machine has five different reception modes — Tel Ready, Fax Ready, Fax/Tel Ready, Tel/Fax Ready and Ans/Fax Ready. We’ll explain each of these in this section.

Tel Ready mode

Use it if:

You want to use the same line for both fax and phone calls

 

and

 

• On that line, you’re using at least one other phone which is not

 

connected to your fax machine

 

or

 

• You have an optional handset installed on your fax machine

In this mode: Your fax machine never answers calls automatically. You must answer each call as described in “Answering calls manually” (this page, left column).

Fax Ready mode

Use it if: Your fax machine uses its own phone line and doesn’t share it with a phone or an answering machine.

In this mode: Your fax machine answers each call and attempts to receive a fax.

Fax/Tel Ready mode

The Fax/Tel Ready mode is a combination of the Fax Ready and Tel Ready modes.

Use it if:

An optional handset is installed on your fax machine

 

and

 

You’re using the machine as both a fax machine and a telephone

In this mode: Your fax machine receives faxes silently but also alerts you when a regular voice call comes in. (Your fax machine also beeps once at the end of each reception.)

If a voice call comes in, your fax machine detects it and sounds a special ring. If you hear it, answer using your optional handset.

Note: This Fax/Tel Ready mode won’t turn off ringers on other telephones in your house or office. Other phones won’t distinguish between fax and voice calls.

2.8

Page 41
Image 41
Muratec F-360 Receiving faxes, Answering calls manually, Reception modes, Use it if