Muratec F-360 manual Operating tips, Symbol and terms, How to operate the machine

Getting started

Operating tips

Symbol and terms

In this manual, the following symbols and terms are used, make sure you know what they mean.

CAUTION This symbol indicates how to avoid personal injury.

Important: This instruction describes conditions or incorrect operations that could cause damage to your machine.

Note:		A note describes helpful hints, restrictions, or how to avoid diffi-
		culties.
[	]	Keys that appear at the lower parts on the LCD. To press this key,
		use the select function key.

“” Items that appear on the LCD.

BOLD WORDS		Keys built into the machine’s control panel.
	LCD	The Liquid Crystal Display. It shows the machine’s status, error
		messages and function menu, etc.
Document		“Document” is the original sheet(s) of paper you send or copy on
		your machine.
Paper		“Paper” is the recording paper for printing.
	,	Shows the direction of the document or paper.
MENU		Any function can be started by first pressing the MENU key.
Cursor key		Press , , or to select items in a menu or move the cursor.

How to operate the machine

Most settings and functions are started by first pressing the MENU key. Then press four-digit numbers to select the function. In this manual, we explain the operation with short-cutoperations (for example, we will say, “press MENU, 1, 1, 0, 1.”).

To press: 0 (zero), 1, 2, 3, 4, 5, 6, 7, 8, 9, # or *

Use: The numeric keypad.

Here’s an example. If we say “press MENU, 1, 1, 0, 1, ENTER” …

…you’d press MENU key

…then 1

…then 1

…then 0 (the numeric key zero)

…then 1

…and then ENTER

Note: Even though our example above includes commas, do not enter them into the fax machine. Those characters appear in our instructions to separate one number from the other. They do not need to be entered into your fax machine.

There is a function (broadcasting) which requires commas to be entered, but there is a special way to enter them. We’ll explain this process later.

1.10