Muratec F-360 manual Making copies, Changing the reduction ratio, Using the bypass tray

Basic operation

Making copies

Your fax machine also doubles as a convenience copier.

To make copies with your fax machine: 1 Press COPY to change to Copy mode.

When the machine is in the Copy mode, the LCD shows:

2 Place your original document in ADF face up just as you would send a fax.

3 As needed, set the following:

•Adjust resolution mode and contrast

•Enter the number of copies

4 Press START to start the copying.

Note: When you make multiple copies, your machine always sort copies.

Note: To stop the copying, press STOP.

Changing the reduction ratio

Your fax machine is capable of reduction when copying. You can choose from 78% (Legal → Letter), 100% and Auto.

Note: If the “Auto” is set, the machine automatically reduce the original document size to fit on the paper size, which makes the margin as little as possible.

To change the reduction ratio:

1 Press MENU, 2, 3, 0, 2, ENTER.

2	To set the reduction rate for copying, select “Reduction Ratio” using the
	cursor key and then press ENTER. The LCD will show:

3 Select from Auto, 100% or 78% for the copy reduction setting. Then press

ENTER.

4 Press STOP to return to the standby mode.

Using the bypass tray

When you need to use a size of paper not currently loaded in your machine’s paper cassette(s), or when you want to use a special type of paper (such as transparency film), use the bypass tray.

Important: Your machine automatically selects suitable paper according to the document size and reduction rate. So, if the suitable sized paper for your copying is in the paper cassette, the machine will use it even if you set the paper in the bypass tray.

Note: If the same sized paper is set in the both the paper cassette and bypass tray, turn the bypass tray priority mode (see page 4.7) to get the priority to use the paper which is set on the bypass tray than the paper in the cassette.

Note: If loading transparency (OHP) film into the bypass tray, be sure that the sheet is designed for laser printers and not for copiers. Also, be sure that the film does not have a paper backing and/or a leading strip. If it does, remove the paper backing and/or strip before inserting. Only film should go in, not film with any backing or strip.

1 Place your original document in ADF face up just as you would send a fax. Note: Place the original document in the same orientation as the paper in

the bypass tray.

2 Set the paper in the bypass tray.

See the table of “Acceptable paper size and cassette capacity” on page 1.7 and “Loading paper in bypass tray” on page 1.9 for more information.

2.10