Muratec F-360 manual Programming F-Code polling

Advanced features

10	Using the cursor key, select the mode you want. Then press ENTER.
	If you want to make another setting, repeat step 9 and 10.
	Note: Choose “-----” if you do not want to specify for this programmable one-
	touch key.
11	Select “Exit” and press ENTER.
12	Press STOP to return your machine to standby mode.

Programming F-Code polling

For this operation to work, two things must be true:

•The document which you’re polling must exist in the remote fax’s F-Code box (ITU-Tstandard sub-addressing/password box).

•You must know the remote fax’s ITU-Tsub-address and password (if any) for each box you want to poll.

To program an F-Code polling operating into a programmable one-touch key:

1 Follow steps 1–6 on pages 3.39.

2 Select “F-Code Polling” and press ENTER. The LCD shows:

3 Use the numeric keypad to enter the ITU-Tsub-address for the box to which you want to send the document.

4 Press ENTER. The LCD shows:

Note: If there isn’t a password for this box, press ENTER, then skip to step 6.

5 Use the numeric keypad to enter the appropriate ITU-Tpassword for the box. Then press ENTER.

6 If you want the polling to begin immediately every time you press the key, proceed to step 7.

If you want to delay the polling, follow steps 7–9 on page 3.43.

7	Select “Exit” and press ENTER.
	The LCD asks if you want to make option settings which includes; resolution,
	contrast, memory transmission, report, cover page and Fax & Copy. If you
	want to make any of these settings, select ON using the cursor key.
8	Press ENTER.
	If you select ON, proceed to step 9.
	If you select OFF, skip to step 12.
9	Using the cursor key, select the setting you want to specify for this program-
	mable one-touch number. Then press ENTER.
10	Using the cursor key, select the mode you want. Then press ENTER.
	If you want to make another setting, repeat step 9 and 10.
	Note: Choose “-----” if you do not want to specify for this programmable one-
	touch key.
11	Select “Exit” and press ENTER.
12	Press STOP to return your machine to standby mode.

3.42