
SECTION 7. SOLVING PROBLEMS
CAUTION: Do not attempt any repairs other than those mentioned in this manual. Removing covers may expose you to dangerous voltages and other risks. Refer all servicing to qualified personnel.
CHECK THE INDICATORS AND DISPLAY PANEL
Check the indicators on the operation panel to check if there are any problems. See page 16 for information about the indicators.
Also, if you see " PROBLEM ↓ | " in the top right hand corner of the screen, | 7 | ||
press ↓ to see what the problem is. | ||||
1. DOCUMENT JAMS |
|
|
| |
If the Clear Original Indicator ( |
|
| ) blinks: |
|
|
|
| ||
|
|
|
❐There is a document jammed in the feeder. Remove the jammed document and repeat the transmission procedure.
❐The document may be longer than the maximum limit (see Recommended Types of Document, page 18).
1.Pull up the scanner release and open the scanner.
2.Carefully take out the jammed original. Do not leave any pieces inside. Then close the scanner.
A defective or nonrecommended document type may cause a jam. See pages 18 and 19.