GENERAL PRECAUTIONS
LOCATION
For the best possible performance, install your machine in a place which satisfies the following conditions.
❐Not exposed to direct sunlight
❐Well ventilated (air turnover at least three times per hour)
❐Level
❐Not subject to vibration
❐ Away from other electronic equipment, to | 4" |
avoid interference |
|
❐Away from areas containing corrosive gas
❐
❐ | 4" | 4" |
❐Temperature 63 to 82 °F
❐Humidity 40 to 70% RH (do not install near a humidifier)
❐Away from heaters and air conditioners, to avoid sudden changes of temperature
❐Within 5 yards of a
❐With the clearance as shown on the right
IMPORTANT POINTS ABOUT POWER CONNECTION
❐The supply from the wall outlet must not fluctuate by more than 20V either side of 115 Vac.
❐The power cord should not be laid in a place where it might trip somebody.
❐Do not lay anything on the power cord.
❐If you have to use an extension cord, make sure that it is capable of carrying 125V/15A, and that your facsimile terminal is the only piece of equipment con - nected to that cord.
NOTE: This machine generates a certain amount of ozone. Although the amount generated is within safety requirements, it is recommended that, to avoid ozone buildup, you install the machine in a room which can be
13
