
SECTION 4. PROGRAMMING THE MACHINE
Switch 03 - Automatic printing of reports
Digit |
| Purpose | |
| Inclusion of part of the image on the following reports: Transmission Result Report, | ||
0 | Memory Storage Report, Polling Clear Report, Communication Failure Report, | ||
Transfer Result Report, Transmission Deadline Report, Polling Confirmation List | |||
| |||
| 0: No | 1: Yes | |
1 to 7 | Do not change these settings. |
Switch 04 - Various
Digit |
| Purpose |
|
| |
0, 1 | Do not change these settings. |
|
|
| |
2 | Automatic reduction |
| 0: Off | 1: On | |
3, 4 | Do not change these settings. |
|
|
| |
5 | Restricted Access |
| 0: Off | 1: On | |
6 | Do not change this setting |
|
|
| |
| Ordering Toner | 0: Disabled | 1: Enabled |
| |
| If this is set to 1, store your dealer’s fax number in Quick Dial Key 32. Then, when | ||||
7 | you need to order toner, use the procedure on page 62. |
| |||
If you wish to use Quick Dial 32 for a number other than that of your dealer, set this | |||||
| |||||
| bit to 0. Quick Dial Key 32 can now be programmed in the same way as other Quick | ||||
| Dial Keys. However, you will not be able to use the Ordering Toner feature. |
Switch 05 - Various
Digit | Purpose |
|
| |
0 | Substitute reception | 0: Off | 1: On | |
1 | ||||
required) | 0: Off | 1: On | ||
| ||||
2 | Do not change this setting |
|
| |
3 | Memory reception if no RTI or CSI received | 0: Possible | 1: Not possible | |
4 to 7 | Do not change these settings. |
|
|
2-3. Economy Transmission Time
1.Function 
6 
0 
2 
2 
2 
2 7 
4
ECONOMY TX
TIME= 11 :00AM
YES
TO END
2. Input the time that you always wish Economy Transmissions to start. ❐ To change from AM to PM and vice versa, press * or #
3. Press
Yes 
Function
when the display is correct.
74