Ricoh H545 manual Connecting The Power And Switching On, 164

Installation

Connecting The Power And Switching On

R CAUTION: Do not switch on until everything is connected properly.

A Insert the power cable into the socket located at the rear of the machine. B Plug in the cable to the mains.

C Turn the power switch on.

TSTP090N

	Important
	❒ The supply form the wall outlet must not fluctuate more than 20 V either
	side of 115 Vac.
	❒ The power cord should not be laid in a place where it might trip somebody.
	❒ Do not lay anything on the power cord.
	❒ If you have to use an extension cord, make sure that it is capable of carry-
8
	ing 125V/15A, and that your facsimile terminal is the only piece of equip-

ment connected to that cord.

164