Ricoh H545 manual Saving Energy With The Power Saving Timer, SET Timer SUN, SET Timer TUE, Example

Saving Energy With The Power Saving Timer

Saving Energy With The Power Saving Timer

You can set sleep time to let the ma- chine go to saving energy condition and set the wake up time when it re- turns to standby mode the next morn- ing. During this Power Saver mode, a fax message received is stored in the memory and will be printed automat- ically the next morning after the wake up timer is activated.

As a typical example, you could pro- gram the heating element inside the printer to stay off at night and over the weekend. (You can program dif- ferent settings for every day of the week.)

To use the Power Saving timer, you must:

•Program the timers for each day of the week.

•Switch the Power Saving timer fea- ture on.

Setting the Power Saving time ( Function 71 )

Note

❒While the Power Saving timer is active, all incoming calls are re- fused if the memory fills up.

-Example:

For Tuesday, set the Power Saving timer to switch the heater on at 9 am and off at 6 pm.

A Press the {Function} {6} then enter access code {2} {2} {2} {2}. Then press {7} {1} and the {Yes} key.

	SET TIMER	Y/N/hi
	SUN
B Use W and V to scroll through the
	days of the week.
			4
	SET TIMER	Y/N/hi
	TUE

Note

❒Example: Press V twice to go to Tuesday.

C Press the {Yes} key

TIMER#1 TUE */#/Y

ON FROM 12:00AM

D To change the ON to OFF, or the other way round, press the {*} or {#} keys.

Note

❒There are two timers for each day, each with an ON/OFF set- ting. “ON” means that the heat- er will switch on at the time indicated. “OFF” means that the heater will switch off at the time indicated.

E Press V to move the cursor under the time.

TIMER#1 TUE */#/Y ON FROM 12:00AM

71