Ricoh H545 User Parameter Hints, Changing your machines default settings, Automatic reports, 136

Technical Reference

SW	Digits & Definition	Settings
12	1: Distinctive Ring	Off*: 0
		On: 1
13	0, 1: Access to the public telephone line	Bit: 0, 1
		Loop Start*: 0, 0
		Ground Start: 0, 1
		Flash Start:1, 1
		PSTN:0, 0
		( Ground Start and Flash
		Start are not available in
		North America )

User Parameter Hints

❖Changing your machine's default settings

These are the settings your machine assumes immediately after it is turned on, after clearing the machine, or after you or the power saving reactivates it. Many of the user parameters determine your machine's default settings.

7 ❖ Clear modes after sending or loading a fax message (Switch 01, bit 7)

Your machine can either reset itself or keep its settings (for a few minutes) af- ter it sends a fax message.

❖Automatic reports

Many types of automatic reports can be switched on or off. See P.41 “Automat- ically printed reports”for details.

❖Accepting messages when out of supplies (Switch 05, bit 0)

This is also called substitute reception. You can accept messages even when out of toner or paper by storing them in memory. See P.19 “Printing Received Messages That Have Been Stored (Substitute Reception)”

136