Tektronix 071-0855-05 user manual SENSeANALysisPATHHPPLMGENEric, SENSeANALysisPATHHPUNEQ

Reference: Remote Commands ~ Command Description

:SENSe:ANALysis:PATH:HPPLM:GENEric

This command enables or disables generic equipment evaluation in the detection of Path Label Mismatch errors. If enabled, the detection of Generic Unequipped (code 01) does not cause a Path Label Mismatch error. The query form returns the current setting.

Syntax: :SENSe<slot>:ANALysis:PATH:HPPLM:GENEric? :SENSe<slot>:ANALysis:PATH:HPPLM:GENEric <Boolean>

:SENSe:ANALysis:PATH:HPUNEQ

This command enables or disables the inclusion of Path Label Unequipped errors in the analysis of received signals. The query form returns the current setting.

Syntax: :SENSe<slot>:ANALysis:PATH:HPUNEQ? :SENSe<slot>:ANALysis:PATH:HPUNEQ <Boolean>

:SENSe:ANALysis:PATH:LABEl:EXPEcted

This command sets the comparison value for Path Label Mismatch analysis. The query form returns the current setting.

Syntax: :SENSe<slot>:ANALysis:PATH:LABEl:EXPEcted? :SENSe<slot>:ANALysis:PATH:LABEl:EXPEcted <NR1>

:SENSe:ANALysis:PATH:TRACe:EXPEcted

This command sets the data sequence length and data byte values against which the receiver compares the received signal for path Trace Identifier Mismatch measurements. The data bytes are formatted as a standard IEEE-488 data block. The query form returns the current settings of these parameters.

Syntax: :SENSe<slot>:ANALysis:PATH:TRACe:EXPEcted? :SENSe<slot>:ANALysis:PATH:TRACe:EXPEcted <Enum> ,<Block>

Parameters	Description
L1B	Constant 8-bit data
L16B	A repeating sequence of 16 bytes, 0-filled with CRC
L16FREE	A repeating sequence of 16 bytes, arbitrary format
L64B	A repeating sequence of 64 bytes, space-filled with CR/LF
L64FREE	A repeating sequence of 64 bytes, arbitrary format

3-24 OTS9100 User Manual