Tektronix 071-0855-05 user manual SYSTemCOMMunicateNETWorkECHO, SYSTemCOMMunicateNETWorkIPPORT

Reference: Remote Commands ~ Command Description

:SYSTem:COMMunicate:NETWork:ECHO

This command sets the initial value of the echo control variable for new network connections. This setting has no effect on connections already established (see :SYSTEM:COMMUNICATE:PORT:ECHO). The query form returns the current setting.

Syntax :SYSTem:COMMunicate:NETWork:ECHO? :SYSTem:COMMunicate:NETWork:ECHO <NR1>

Bit value Function

0Disables echo

1Enables echo

2Causes the input terminator character to be echoed as CR-LF

4Enables input line buffering: received characters are not processed until the terminating CR or LF

:SYSTem:COMMunicate:NETWork:IPPORT

This command sets the IP port address on which the system listens for new connections. Changing the setting has no effect on connections already established. The query form returns the current setting.

Syntax :SYSTem:COMMunicate:NETWork:IPPORT? :SYSTem:COMMunicate:NETWork:IPPORT <NR1>

:SYSTem:COMMunicate:NETWork:PROMpt

This command sets the initial state of the user prompt on new network connections. This setting has no effect on connections already established (see :SYSTEM:COMMUNICATE:PORT:PROMPT). The query form returns the current setting.

Syntax :SYSTem:COMMunicate:NETWork:PROMpt? :SYSTem:COMMunicate:NETWork:PROMpt <Boolean>

:SYSTem:COMMunicate:NETWork:RXTERM

This command sets the initial selection, for new network connections, of the character recognized as End- of-Input. This setting has no effect on connections already established (see :SYSTEM:COMMUNICATE:PORT:RXTERM). The query form returns the current setting.

Syntax :SYSTem:COMMunicate:NETWork:RXTERM? :SYSTem:COMMunicate:NETWork:RXTERM <Enum>

Parameters	Description
LF	Line feed (LF) character, 0x0A; an optional preceding CR is ignored
CR	Carriage return (CR) character, 0x0D; an optional preceding LF is ignored

3-66 OTS9100 User Manual