Specifications

622 MHz Trigger Output

Connector: SMA

External Termination: 50Ω, AC coupled

Voltage Level: 500 mVpp

Frequency: 622.08 MHz

Description: Signal provided as a scope trigger for viewing data eye diagrams. This sub-rate clock is derived from the Line Clock.

External 155.52 MHz Clock Input

Connector: SMA

Internal Termination: 50Ω, AC coupled

Voltage Level: 800 mVpp ± 200 mVpp

Frequency: 155.52 MHz ± 150ppm

Description: Provides a means to synchronize the transmit system to a user supplied reference.

Transmitter Data Output (Electrical)

Connector: SMA

External Termination: 50Ω, DC coupled

Voltage Output LOW: 0.00V ≥ Vol ≥ -0.10V

Voltage Output HIGH: -0.45V ≥ Voh ≥ -0.60V

Description: Provides the 10 Gb/s data signal. Typically connected to TX DATA IN on the Optics card.

10 GHz Clock Input

Connector: SMA

Internal Termination: 50Ω, AC coupled

Voltage Level: 800 mVpp (nominal)

Frequency: 9.95328 GHz ± 150ppm

Description: Provides the Bit rate clock for the transmitter data output. This input is connected to the 10 Ghz Clock OUT of the Clock Trigger card (OTS91C3).

10 GHz Trigger Output

A-12

OTS9100 User Manual

Page 225
Image 225
Tektronix 071-0855-05 user manual MHz Trigger Output, External 155.52 MHz Clock Input, Transmitter Data Output Electrical