Operating Basics: User Interface
2-22 OTS9100 User Manual
LED Display Selection
The LED indicators displayed in the LED window reflect the status of each OTS receiver loaded
in the system. Choices may be made by using the pull down menu to select each individual slot, a
Module Summary, or User Selected Signals. Figure 2-9 reflects the LED Window for each of the
LED Display selections.
If Select Signals to OR is selected a menu with a check box list displays. Choices made in this
menu determine what the User Selected Signals will display. Two user defined fields are
provided as a means to label different test names.
The User Selected Signals display reflects all the user defined selections made in the Select
Signals to OR… check box.
Module Summary displays a generalized summarization of all LED states of each individual slot.
Selecting an individual slot from the drop down menu causes all the LEDs associated with the
selected card slot to display. Only the status of the selected slot will be displayed.
Select Signal User Selected Signal Slot Signal Module Summary
(default view)
Figure 2-9: LED Display selection options