Operating Basics: User Interface

Transmitter – Transport Overhead

The Transport overhead property menu, as shown in Figure 2-11, can be used to pass or change the 9.95238 Gb/s signal overhead bytes in the first STS-1 or STM-1 of the OC-192 or STM-64 frame, respectively. In addition, the J0 Trace and S1 byte may be edited. The editing procedure for each is described in more detail in the following sections.

NOTE: Overhead data displays are in hexadecimal format. All edits to overhead display must be in hexadecimal format.

Figure 2-11: Transmitter – Transport Overhead menu

2-30

OTS9100 User Manual

Page 59
Image 59
Tektronix 071-0855-05 user manual Transmitter Transport Overhead menu