SOURceDATASPESTUFfing, SOURceDATASTRUcture | Tektronix 071-0855-05

Reference: Remote Commands ~ Command Description

:SOURce:DATA:SPE:STUFfing

This command controls the SPE fixed byte stuffing. When enabled, columns 30 and 59 of the active STS-1 channel contain the fixed byte value zero and are not used for payload. When disabled, columns 30 and 59 are part of the payload. This command is applicable when the active channel structure is set to STS-1. The query form returns the current setting.

Syntax :SOURce<slot>:DATA:SPE:STUFfing? :SOURce<slot>:DATA:SPE:STUFfing <Boolean>

:SOURce:DATA:STRUcture

This command sets the structure of the signal generated by the OTS-9000 transmitter. The query form returns the current setting.

Syntax :SOURce<slot>:DATA:STRUcture? :SOURce<slot>:DATA:STRUcture <Enum>

Parameter	Description
G10C	Bulk data at 10Gb/s
G2P5C	Bulk data at 2.5 Gb/s
M622C	Bulk data at 622 Mb/s
M155C	Bulk data at 155 Mb/s
M51A	Bulk data at 51 Mb/s (SONET only)

:SOURce:DATA:TOH:STS1A:ALL

This command sets the values of all bytes in the generated STS-1 #1 Transport Overhead data. The query form returns the current setting. There are 27 bytes in the data block. These correspond to the overhead bytes A1, A2, J0, B1, E1*, F1*, D1*, D2*, D3*, H1..H3, B2, K1*, K2*, D4*..D12*, S1*, Z2*, E2*. Only those bytes marked with * are settable; the values of the other bytes are automatically set by the transmitter.

Syntax :SOURce<slot>:DATA:TOH:STS1A:ALL? [<NR1>] :SOURce<slot>:DATA:TOH:STS1A:ALL <NR1> ,<Block>

:SOURce:DATA:TOH:STS1A:BYTE

This command sets the value of a specific byte in the generated STS-1 #1 Transport Overhead data. The byte selection is specified by three numeric parameters, for STS-1 number, row, and column; because only STS-1 #1 may be selected, the first parameter must be set to 1. The query form returns the current byte value.

Syntax :SOURce<slot>:DATA:TOH:STS1A:BYTE? <NR1> ,<NR1> ,<NR1> :SOURce<slot>:DATA:TOH:STS1A:BYTE <NR1> ,<NR1> ,<NR1> ,<NR1>

OTS9100 User Manual

3-57

Image 188

Tektronix 071-0855-05 user manual SOURceDATASPESTUFfing, SOURceDATASTRUcture, SOURceDATATOHSTS1AALL, SOURceDATATOHSTS1ABYTE

Contents

OTS USA Warranty Page Table of Contents Reference Analysis SONET/T1M1 Analysis SDH/G.826 Iii Appendices SOURceDATAPAYLoadBACKgroundPATTern General Safety Summary How to Avoid Fire or Personal Injury General Safety Summary Keep Product Surfaces Clean and Dry Safety Terms and Symbols Symbols on the ProductTerms in this Manual Terms on the Product General Safety Summary Viii Preface How This Manual is Organized Conventions Getting Started Product Description OTS9100 Features and Capabilities Getting Started Accessories Standard with each shipmentOTS91L4 Standard OTS91L5 Standard OTS91L7 Standard OTS91L8 StandardOTS91R2 Standard OTS91T3 Standard International Power Plug Options Chassis Only Adapters, SMA OTS9100 Installation First Operation Removing Cards Slot Positioning of OTS Cards Multiple Modules OTS9000 with card slot assignment Module Card Interconnection Power On and Software Initialization Proper location Interconnection cables Module Quick Check Transmitter SetupReceiver Setup Getting Started Shutdown and Power Off Emergency Startup Disk Front Panel Indicators and Connectors OTS9100 Front Panel Optical OUT 10Gb/s Transceiver OpticsModule OK Optical Rx Data OUTTx Data Appropriate circuit. -3 1550 nm Transceiver Front Panel Laser Lockout, Remote Interlock Module OK Defect indicator will turn off when a new test is startedReceive Analysis Rx Clock OUT Rx Event OUTRx Data Transmit Front Panel Transmit GenerationTx Event OUT GHz Clock MHz Trig OUTTx Data OUT Clock Trigger MHz External ClockGHz Trig OUT Rx Clock GHz Clock Out Software Interface Operating Basics Elements of the User Interface Task Bar Menu BarSystem View Single Mode Multiple ModeMultiple Window Mode View Window Tool Bar Laser Control Bar Error Test Control BarMain Status Bar Client Lockout Frame Grabbers TestLaser Off LED Window Module Signal Summary LED Panel Slot Signal LED PanelUser Selected Signal LED Window Clear History Module LED Panel LED Module Display Description of Status Window Virtual LED Indicators SEF OOF Select Signal User Selected Signal Slot Signal LED Display Selection Navigation Window Scroll Buttons Summary Icons Setup Property Menus Signal Standard 10 Transmitter Setup Signal menu Bert Mode Signal SourceTiming Source Trigger Output Packet Over Sonet POS SPE/VC3 Stuff Column Control Background Channels Transmitter Transport Overhead 11 Transmitter Transport Overhead menu Edit Overhead 12 Edit Overhead dialog box Through Mode 13 Through Mode Overwrite menu J0 Multi-Byte Trace 14 Transmitter J0 Trace dialog box Transmitter Path Overhead 16 Transmitter Path Overhead Property Menu Path Through Mode Edit Path Overhead J1 Multi-Byte Trace 19 Transmitter J1 Trace dialog box Transmitter Error Insertion 21 Transmitter Error Insertion menu Anomaly Insertion and Through Mode Anomaly Insertion 23 Defect Insertion of the Error Insertion menu Defect Insertion Transmitter K1, K2 Decode 24 Transmitter K1, K2 Decode menu 25 Edit K1, K2 Bytes dialog box Operating Basics User Interface IP Setup Transmitter IP Payload IP Header Transmitter IP Error Insertion Error Selection Current Error Insertion Receiver Signal 26 Receiver Setup Signal menu Signal Structure Test Pattern Receiver Threshold Offset 27 Receiver Threshold Offset dialog box 28 Receiver Setup Trace Mismatch menu Receiver Trace Mismatch Edit C2 Byte 29 J0 Trace Editor dialog box 31 Edit C2 dialog box Hpplm and HP Unequipped Detection Receiver IP Setup Setup Summary 32 Setup Summary menu Signal Monitor Menus Receiver Transport Overhead RS Trace Section Trace J0 S1 Synchronization Status 35 Signal Monitor Path Overhead Receiver Path Overhead Path Trace J1 C2 Status 36 Signal Monitor K1,K2 Decode Receiver K1,K2 Decode 37 Signal Monitor Payload Receiver Payload Test Control Menu 39 Test Control Parameters dialog box Test Control Summary 40 Test Control Summary menu Measurements Menu Receiver Real-Time 42 Real-Time menu Path display Receiver Cumulative 44 Cumulative Measurements Display Section and Line 45 Cumulative Measurements Display Path Receiver History 46 Example of Results History Data Section/Line 47 Example of Results History Data -Path Operating Basics User Interface Receiver IP Measurements Receiver IP Measurements display Transmitter IP Measurements Analysis Menu Analysis SONET/T1M1 49 Analysis menu SONET/T1M1 Path Analysis SDH/G.826 50 Analysis menu SDH/G.826 RS/MS 51 Analysis menu SDH/G.826 Path APS Measurements Menu 52 APS Measurements menu 53 Set APS Test Parameters dialog box 54 Copy APS Measurement Data dialog box Remote Access Setups Select Server Display Notation 59 View Options dialog box Display Configuration Server System System View Scpi Output 63 View Scpi Output dialog box Results Files Results File Management 64 Results File Management dialog box ResultsViewer OperationOpening files on the local computer On the Local computer Connecting to an OTS System Viewing results files 65 Cumulative Results screen of the ResultsViewer Configuring ResultsViewer Selecting and arranging windowsPrinting results data Exporting test data to other programs Sample output of data from a test results file A202 A604 Record type codes Summary report Test file info Sonet GR-253 Line Analysis History data Configuring the exported data 66 Configure Data Report dialog box Select Events Starting the Event Printer programLogging Copy to Clipboard Copy to FileCopy to Printer Clear Minimizing the Event Printer window Configuring a printer in WindowsMuting Event Printer behavior with continuous events 102 Remote Control Setup and Format Commands Commands OverviewIeee 488.2 System Commands System Configuration Queries Remote Control Port SettingsRemote Control Lockout Save and Restore System Settings System Signal Standard OTS9100 moduleReceiver Commands OTS9100 module System File Management Receiver Test Control OTS9100 module Receiver Signal Measurement Commands OTS9100 moduleReceiver Signal Analysis Commands OTS9100 module Transmitter Commands OTS9100 module Ieee 488.2 Common Commands Command and Query StructureSyntax Description Block Format Hex Block Format Scpi Commands and Queries Command FormatQuery format Example Parameter types and formats Sourcedatapayloadpattern Enum Optional and alternative parameters #216ABCDEFGHIJKLMNOP Abbreviating Commands, Queries, and Parameters Controlling Responses to QueriesMinimum information needed Accepted short form Chaining Commands and Queries Example of chaining commands and queries General Rules Slot Specifiers Command Description ESE OPC SENSeANALysisG826AMSFAR SENSeANALysisG826AMSFARALL SENSeANALysisG826APATHFAR SENSeANALysisG826AMSNEARSENSeANALysisG826AMSNEARALL SENSeANALysisG826APATHNEARALL SENSeANALysisG826APATHFARALLSENSeANALysisG826APATHNEAR SENSeANALysisGR253ALINEFAR SENSeANALysisG826ARSSENSeANALysisG826ARSALL SENSeANALysisGR253ALINENEARALL SENSeANALysisGR253ALINEFARALLSENSeANALysisGR253ALINENEAR SENSeANALysisGR253APATHFAR SENSeANALysisGR253APATHFARALL SENSeANALysisGR253APATHNEAR SENSeANALysisGR253APATHNEARALL SENSeANALysisPATHHPPLM SENSeANALysisGR253ASECTionSENSeANALysisGR253ASECTionALL SENSeANALysisPATHHPPLMGENEric SENSeANALysisPATHHPUNEQSENSeANALysisPATHLABElEXPEcted SENSeANALysisPATHTRACeEXPEcted SENSeANALysisPATHTRACeEXPEctedVALUeSTRIng SENSeANALysisPATHTRACeEXPEctedTYPESENSeANALysisPATHTRACeEXPEctedVALUe SENSeANALysisSECTionTRACeEXPEctedTYPE SENSeANALysisPATHTRACeTIMSENSeANALysisSECTionTRACeEXPEcted SENSeANALysisSECTionTRACeEXPEctedVALUe SENSeANALysisSECTionTRACeEXPEctedVALUeSTRIngSENSeANALysisSECTionTRACeTIM SENSeDATAAUTOscanSTRUcture SENSeDATACHANnel SENSeDATAIPPAYLoadPATTernSENSeDATAIPPAYLoadPATTernUDATA SENSeDATAIPSTReamINDEX SENSeDATAPATHTRACeTYPE SENSeDATAPATHTRACeVALUeSENSeDATAPATHTRACeVALUeSTRIng SENSeDATAPAYLoadPATTern SENSeDATAPAYLoadPATTernUDATA SENSeDATAPOHALLSENSeDATAPOHBYTE SENSeDATAPOHBYTEC2A SENSeDATARATE SENSeDATASECTionTRACeSENSeDATASECTionTRACeTYPE SENSeDATASECTionTRACeVALUe SENSeDATASPESTUFfing SENSeDATASTRUctureSENSeDATATOHSTM1AALL SENSeDATATOHSTS1AALL SENSeMEASureAPSTimeCONDition SENSeINPUtTHREsholdSENSeINPutTHResholdLOS SENSeMEASureAPSTimeRUN SENSeMEASureAPSTimeDETEctedSENSeMEASureAPSTimeMAXTime SENSeMEASureAPSTimeSTATus SENSeMEASureAPSTimeTHREshold SENSeMEASureAPSTimeVALUeSENSeMEASureHDLCFRAMes SENSeMEASureHDLCFRAMesALL SENSeMEASureHDLCBYTes SENSeMEASureIPPACKetsSENSeMEASureIPPACKetsALL SENSeMEASureLINECUMUlative SENSeMEASurePATHCUMUlative SENSeMEASureLINEWINDowSENSeMEASureLINEWINDowALL SENSeMEASurePATHWINDowALL SENSeMEASurePATHCUMUlativeALLSENSeMEASurePATHWINDow SENSeMEASureSECTionWINDow SENSeMEASureSECTionCUMUlativeSENSeMEASureSECTionCUMUlativeALL SENSeMEASureSECTionWINDowALL SENSeMEASureWINDowCLEARSENSeMEASureWINDowLEVEL SENSeMEASureWINDowSIZE SENSeOVERheadMONItorCHANnel SENSeSIGNalSTANdardSENSeOPTicalTHResholdAUTO SENSeSTATusLEDSNUMEric SENSeSTATusLEDSSENSeSTATusLEDSHEXadecimal SENSeSTATusPATHLEDSNUMEric SENSeSTATusPATHLEDSSENSeSTATusPATHLEDSHEXadecimal SENSeTESTDESCription SENSeTESTMODESENSeTESTSTATe SENSeTESTTIME SENSeTESTTIMEELAPsed SENSeTRIGgerMODESOURceCLOCkSOURce SOURceDATABACKgroundSTRUcture SOURceDATACHANnel SOURceDATACHANnelREPLicateSOURceDATAHDLCIFRameGAP SOURceDATAIPHEADerADDRessDEST SOURceDATAIPHEADerFLAG SOURceDATAIPHEADerFRAGOFFSetSOURceDATAIPHEADerID SOURceDATAIPHEADerPROTocol SOURceDATAIPHEADerTSERVice SOURceDATAIPHEADerTTLiveSOURceDATAIPHEADerVERSion SOURceDATAIPPAYLoadPATTern SOURceDATAIPSTReamINDEX SOURceDATAIPTRAFficSOURceDATAPOSSCRambling SOURceDATAOVERheadPASSthru SOURceDATAPATHOVERheadPASSthru SOURceDATAOVERheadPASSthruALLSOURceDATAPARItyLOOP SOURceDATAPATHTRACeTYPE SOURceDATAPATHOVERheadPASSthruALLSOURceDATAPATHTRACe SOURceDATAPAYLoadBACKgroundPATTern SOURceDATAPATHTRACeVALUeSOURceDATAPATHTRACeVALUeSTRIng SOURceDATAPAYLoadPATTernUDATA SOURceDATAPAYLoadBACKgroundPATTernUDATASOURceDATAPAYLoadPATTern SOURceDATAPOHALL SOURceDATAPOHBACKgroundBYTEC2ASOURceDATAPOHBYTE SOURceDATAPOHBYTEC2A SOURceDATAPOHDEFAult SOURceDATARATESOURceDATASECTionTRACe SOURceDATASECTionTRACeTYPE SOURceDATASECTionTRACeVALUe SOURceDATASECTionTRACeVALUeSTRIngSOURceDATASOURce SOURceDATASPEBACKgroundSTUFfing SOURceDATASPESTUFfing SOURceDATASTRUctureSOURceDATATOHSTS1AALL SOURceDATATOHSTS1ABYTE SOURceDATATOHSTS1ADEFAult SOURceINSErtANOMalyMODESOURceINSErtANOMalyRATE SOURceINSErtANOMalyRATERANGe SOURceINSErtANOMalyTYPE SOURceINSErtANOMalyREPLicateB2ASOURceINSErtANOMalySTATe SOURceINSErtDEFEctTIME SOURceINSErtDEFEctMODESOURceINSErtDEFEctSTATe SOURceINSertIPANOMalyMODE SOURceINSErtDEFEctTIMERANGeSOURceINSErtDEFEctTYPE SOURceINSertIPANOMalyRATE SOURceINSertIPANOMalyRATERANGeSOURceINSertIPANOMalyTYPE SOURceMEASureHDLCBYTes SOURceMEASureHDLCFRAMes SOURceMEASureHDLCFRAMesALLSOURceMEASureIPPACKets SOURceMEASureIPPACKetsALL SOURceSIGNalSTANdard SOURceOUTPutLASerINFOOPTionSOURceOUTPutLASerINFOSERial SOURceOUTPutLASerINFOWAVelength STATusPRESet SOURceTRIGgerMODESYSTemCOMMunicateGPIBPRIMary SYSTemCOMMunicateGPIBSECOndary SYSTemCOMMunicateNETWorkECHO SYSTemCOMMunicateNETWorkIPPORTSYSTemCOMMunicateNETWorkPROMpt SYSTemCOMMunicateNETWorkRXTERM SYSTemCOMMunicatePORTPROMpt SYSTemCOMMunicateNETWorkTXTERMSYSTemCOMMunicatePORTECHO SYSTemCOMMunicateSERIalCOM1ADTR SYSTemCOMMunicatePORTRXTERMSYSTemCOMMunicatePORTTXTERM SYSTemCOMMunicateSERIalCOM1AFLOW SYSTemCOMMunicateSERIalCOM1AENABleSYSTemCOMMunicateSERIalCOM1AECHO SYSTemCOMMunicateSERIalCOM1APARIty SYSTemCOMMunicateSERIalCOM1ANDATASYSTemCOMMunicateSERIalCOM1ANSTOP SYSTemCOMMunicateSERIalCOM1APROMpt SYSTemCOMMunicateSERIalCOM1ARATESYSTemCOMMunicateSERIalCOM1ARTS SYSTemCOMMunicateSERIalCOM1ARXTERM SYSTemCOMMunicateSERIalCOM2AENABle SYSTemCOMMunicateSERIalCOM1ATXTERMSYSTemCOMMunicateSERIalCOM2ADTR SYSTemCOMMunicateSERIalCOM2AECHO SYSTemCOMMunicateSERIalCOM2ANSTOP SYSTemCOMMunicateSERIalCOM2AFLOWSYSTemCOMMunicateSERIalCOM2ANDATA SYSTemCOMMunicateSERIalCOM2ARATE SYSTemCOMMunicateSERIalCOM2APARItySYSTemCOMMunicateSERIalCOM2APROMpt SYSTemCONFigMODuleSERIAL SYSTemCOMMunicateSERIalCOM2ARTSSYSTemCOMMunicateSERIalCOM2ARXTERM SYSTemCOMMunicateSERIalCOM2ATXTERM SYSTemCONFigMODuleTYPE SYSTemCONFigMODuleVARIANTSYSTemCONFigMODuleVERSion SYSTemCONFigSLOTs SYSTemERRor SYSTemFILEsMGMTRESUltsAGESYSTemFILEsMGMTRESUltsCOUNt SYSTemFILEsMGMTRESUltsDESTination SYSTemFILEsMGMTRESUltsPERcent SYSTemFILEsMGMTRESUltsENABleSYSTemFILEsMGMTRESUltsINTErval SYSTemFILEsMGMTRESUltsSORT SYSTemFILEsMGMTRESUltsTOTAlsizeSYSTemFORMatBLOCk SYSTemHEADers SYSTemSIGNalSTANdard SYSTemLOCKRELeaseSYSTemLOCKRELeaseFORCE SYSTemLOCKREQuest SYSTemVERBose TST Reference Remote Commands ~ Command Description Environmental Specifications Temperature RangesDimensions Weight Transmitter Specifications Signal GenerationInternal Mode Clock Source Multiplexer Through ModeTable A-2 SDH Default Overhead Regenerator Internal Payload Structures Test PatternsActive Channel Background Channel Overhead Manipulation Specifications Error Injection Defect/ Alarm Generation Table A-3 Error Rate Max/Min Measurements Receiver Analyzer SpecificationsAlarms Detection Overhead Display Transmitter Input and Output Specifications OTS91L7, OTS91L8 Signal Name 9.95238 Gb/s Optical Input Specifications Frame Sync Output Event Trigger Output MHz Trigger Output External 155.52 MHz Clock InputTransmitter Data Output Electrical GHz Clock Input RX Clock Input GHz Clock Output RX Data Input Receiver Input and Output SpecificationsRX Clock Output Module Interconnect Specifications Signal Name Tx Data Out / Tx DataSignal Name Rx Data Out / Rx Data Signal Name Rx Data Out / 10GHz/s Data Laser Safety Certifications and ComplianceCE Mark Compliance EMC Compliance Directive Optical Card Front Panel Descriptions Optical OUT Tx Data Laser Lockout, Remote Interlock Optical Rx Data OUT 10 Gb/s TRANSMIT-ONLY Optics Card L5-15, L5-13 Tx Data 10Gb/s Optical RECEIVE-ONLY L6 Module OK 10Gb/s Optical Transceiver Interface External Laser L7 External Laser 10Gb/s Opticaltransmit ONLY/ External Laser L8 Figure B-5 shows the Optical Transmitter card front panel External Laser Accessing Help Files Emergency Startup Disk Emergency Startup Disk List of Acronyms List of Acronyms Module Card Replacement Tektronix Part Number Description Module Card Replacement Installing the Software Installing the Software Appendix Illustrations of cabled OTS9100 module Cabling OTS9100 Module to OTS9261 Tunable Laser Index Index Index-3 Index-4