Reference: Remote Commands ~ Command Description

:SYSTem:COMMunicate:SERIal:COM2A:PARIty

This command sets, for the COM2 serial port, the function of the high-order (eighth) bit in each serial. The query form returns the current setting.

Syntax :SYSTem:COMMunicate:SERIal:COM2A:PARIty? :SYSTem:COMMunicate:SERIal:COM2A:PARIty <Enum>

Parameter

Description

NONE

No parity

ODD

Odd parity

EVEN

Even parity

MARK

The parity bit is always set

SPACE

The parity bit is always clear

:SYSTem:COMMunicate:SERIal:COM2A:PROMpt

This command enables or disables the user prompt on the COM2 serial port. When the prompt is enabled, the system prompts when it is ready for a command. The query form returns the current setting.

Syntax :SYSTem:COMMunicate:SERIal:COM2A:PROMpt? :SYSTem:COMMunicate:SERIal:COM2A:PROMpt <Boolean>

:SYSTem:COMMunicate:SERIal:COM2A:RATE

This command sets the baud rate for the COM2 serial port. The query form returns the current setting.

Syntax :SYSTem:COMMunicate:SERIal:COM2A:RATE? :SYSTem:COMMunicate:SERIal:COM2A:RATE <Enum>

Parameters

Description

R1200B

1200 baud

R2400B

2400 baud

R4800B

4800 baud

R9600B

9600 baud

R19KB

19.2K baud

R38KB

38.4K baud

R57KB

57.6K baud

R115KB

115.2K baud

3-74

OTS9100 User Manual

Page 205
Image 205
Tektronix 071-0855-05 user manual SYSTemCOMMunicateSERIalCOM2APARIty, SYSTemCOMMunicateSERIalCOM2APROMpt