Tektronix 071-0855-05 SENSeTESTDESCription, SENSeTESTMODE, SENSeTESTSTATe, SENSeTESTTIME

Reference: Remote Commands ~ Command Description

:SENSe:TEST:DESCription

This command sets the description text that is written to the results file at the start of a text. The text may be up to 127 characters long. The query form returns the current setting.

Syntax :SENSe<slot>:TEST:DESCription? :SENSe<slot>:TEST:DESCription <String>

:SENSe:TEST:MODE

This command sets the way the OTSsystem runs a test. The query form returns the current setting.

Syntax :SENSe<slot>:TEST:MODE? :SENSe<slot>:TEST:MODE <Enum>

Parameters	Description
CONTinuous	The test runs continuously
TIMEd	The test runs for a preset amount of time
REPEtitive	The test runs for a preset time and then restarts

:SENSe:TEST:STATe

This command controls the OTSsystem's execution of a test. The query form returns the state of a currently-executing test.

Syntax :SENSe<slot>:TEST:STATe? :SENSe<slot>:TEST:STATe <Enum>

Parameters	Description
RUN	Start a test
PAUSe	Pause the test in progress
RESUme	Resume the test in progress
END	Stop the test
RESTart	Stop the test and start a new test
STARTING	A test is starting (status query only)
STOPPING	A test is stopping (status query only)

:SENSe:TEST:TIME

This command sets the time duration for a test. The query form returns the currently programmed time.

Syntax :SENSe<slot>:TEST:TIME? :SENSe<slot>:TEST:TIME <NR1>

3-44 OTS9100 User Manual