Tektronix 071-0855-05 user manual SENSeTESTTIMEELAPsed, SENSeTRIGgerMODE, SOURceCLOCkSOURce

Reference: Remote Commands ~ Command Description

:SENSe:TEST:TIME:ELAPsed

This query returns the time since the start of the current test.

Syntax :SENSe<slot>:TEST:TIME:ELAPsed?

:SENSe:TRIGger:MODE

This command sets the condition that will produce a trigger output from the OTS-9000 receiver. The query form returns the current setting.

Syntax :SENSe<slot>:TRIGger:MODE? :SENSe<slot>:TRIGger:MODE <Enum>

Parameters	Description
OFF	The trigger output is disabled
ANOMaly	A trigger occurs when an anomaly is received
DEFEct	A trigger occurs when a defect is received
PAYload	A trigger occurs when a payload data error is received
AD	A trigger occurs when an anomaly or defect is received
AP	A trigger occurs when an anomaly or payload data error is received
DP	A trigger occurs when a defect or payload data error is received
ADP	A trigger occurs when an anomaly, defect, or payload data error is received

:SOURce:CLOCk:SOURce

This command selects the timing source for the signal generated by the OTS-9000 transmitter. The query form returns the current setting.

Syntax :SOURce<slot>:CLOCk:SOURce? :SOURce<slot>:CLOCk:SOURce <Enum>

Parameters	Description
INTErnal	Transmitter timing is based on the OTS-9000's internal reference
EXTErnal	Transmitter timing is derived from an external signal applied to the clock/trigger card

:SOURce:DATA:BACKground:STRUcture

This command sets the background structure of the signal generated by the OTS-9000 transmitter. The query form returns the current setting.

Syntax: :SOURce<slot>:DATA:BACKground:STRUcture? :SOURce<slot>:DATA:BACKground:STRUcture <Enum>

Parameters	Description
G10C	Bulk data at 10 Gb/s
G2P5C	Bulk data at 2.5 Gb/s
M622C	Bulk data at 622 Mb/s
M155C	Bulk data at 155 Mb/s
M51A	Bulk data at 51 Mb/s (SONET only)

OTS9100 User Manual 3-45