Tektronix 071-0855-05 user manual SOURceINSertIPANOMalyRATERANGe, SOURceINSertIPANOMalyTYPE

Reference: Remote Commands ~ Command Description

:SOURce:INSert:IP:ANOMaly:RATE

This command sets the rate at which continuously generated IP anomalies are inserted. The query form returns the current value.

Syntax :SOURce<slot>:INSert:IP:ANOMaly:RATE? :SOURce<slot>:INSert:IP:ANOMaly:RATE <NR3>

:SOURce:INSert:IP:ANOMaly:RATE:RANGe

This query returns the minimum and maximum rate values for the specified IP anomaly type. The values returned are formatted as NR3 parameters.

Syntax :SOURce<slot>:INSert:IP:ANOMaly:RATE:RANGe? <Parameter>

Parameters	Description
NONE	No anomaly is selected
FCS	HDLC frame check sequence errors
PAYLoad	IP payload errors
CRC	IP header check sum errors

:SOURce:INSert:IP:ANOMaly:TYPE

This command selects the type of IP anomaly inserted. The query form returns the current selection.

Syntax :SOURce<slot>:INSert:IP:ANOMaly:TYPE? :SOURce<slot>:INSert:IP:ANOMaly:TYPE <Parameter>

Parameters	Description
NONE	No anomaly is selected
FCS	HDLC frame check sequence errors
PAYLoad	IP payload errors
CRC	IP header check sum errors

:SOURce:MEASure:HDLC:BYTes

This query returns the number of HDLC bytes transmitted with good FCS.

Syntax :SOURce<slot>:MEASure:HDLC:BYTes?

3-62 OTS9100 User Manual