Tektronix 071-0855-05 user manual SOURceDATACHANnelREPLicate, SOURceDATAHDLCIFRameGAP

Reference: Remote Commands ~ Command Description

:SOURce:DATA:CHANnel

This command sets the active channel of the signal generated by the OTS-9000 transmitter. The query form returns the current setting.

Syntax: :SOURce<slot>:DATA:CHANnel? :SOURce<slot>:DATA:CHANnel <NR1>

:SOURce:DATA:CHANnel:REPLicate

This command enables insertion of the active-channel payload into all channels of the generated signal. When enabled, all channels contain identical payload data and the background-channel settings have no effect. The query form returns the current setting.

Syntax: :SOURce<slot>:DATA:CHANnel:REPLicate? :SOURce<slot>:DATA:CHANnel:REPLicate <Boolean>

:SOURce:DATA:HDLC:IFRame:GAP

This query returns the HDLC inter frame gap.

Syntax :SOURce<slot>:DATA:HDLC:IFRame:GAP?

:SOURce:DATA:IP:HEADer:ADDRess:DEST

This command sets the transmitter IP header destination address. The query form returns the current settings. The first parameter specifies the first most significant byte. The last parameter specifies the least significant byte.

Syntax :SOURce<slot>:DATA:IP:HEADer:ADDRess:DEST? :SOURce<slot>:DATA:IP:HEADer:ADDRess:DEST <NR1>,<NR1>,<NR1>,<NR1>

:SOURce:DATA:IP:HEADer:ADDRess:SOURce

This command sets the transmitter IP header source address. The query form returns the current settings. The first parameter specifies the first most significant byte. The last parameter specifies the least significant byte.

Syntax :SOURce<slot>:DATA:IP:HEADer:ADDRess:SOURce? :SOURce<slot>:DATA:IP:HEADer:ADDRess:SOURce <NR1>,<NR1>,<NR1>,<NR1>

3-46 OTS9100 User Manual