Operating Basics: User Interface
OTS9100 User Manual 2-15
Tool Bar
The toolbar provides easy access to different views and selections of the user interface. The
buttons on the toolbar provide a toggle between select server, the LED window, the module LED
panel, the system view, the Navigation window, the laser and test control bars, and the SCPI
output. Each of these controls is discussed in further detail in later sections. The Test Control bar
may be activated via the View menu or from the toggle key on the toolbar.
NOTE: Changing parameters while a test is in progress may cause invalid errors.
Laser Control Bar
The Laser Control bar provides the user with software control over the laser. Use the pull down
menu to select which laser to activate or deactivate. Click the On button to turn on the selected
laser. Click the Off button to turn off the selected laser.
Click the button to close the bar or use the View menu to activate the bar. When the “…”
button is clicked, the Setup Summary is displayed.
Laser Control bar Test Control Bar
SELECT
SERVER
LED PANEL
LED MODULES
NAVIGATION
LASER
SYSTEM
TEST
SCPI