Tektronix 071-0855-05 user manual SYSTemCOMMunicatePORTRXTERM, SYSTemCOMMunicatePORTTXTERM

Reference: Remote Commands ~ Command Description

:SYSTem:COMMunicate:PORT:RXTERM

This command selects, for the current remote-control port, the character the OTS system recognizes as End-of-Input. The query form returns the current setting.

Syntax :SYSTem:COMMunicate:PORT:RXTERM? :SYSTem:COMMunicate:PORT:RXTERM <Enum>

Parameters	Description
LF	Line feed (LF) character, 0x0A; an optional preceding CR is ignored
CR	Carriage return (CR) character, 0x0D; an optional preceding LF is ignored

:SYSTem:COMMunicate:PORT:TXTERM

This command controls, for the current remote-control port, the characters the OTS system sends at the end of a query response. The query form returns the current setting.

Syntax :SYSTem:COMMunicate:PORT:TXTERM? :SYSTem:COMMunicate:PORT:TXTERM <Enum>

Parameters	Description
LF	Line feed (LF) character, 0x0A
CR	Carriage return (CR) character, 0x0D
CRLF	CR followed by LF
LFCR	LF followed by CR

:SYSTem:COMMunicate:SERIal:COM1A:DTR

This command controls the state of the DTR (Data Terminal Ready) control signal on the COM1 port. The query form returns the current setting.

Syntax :SYSTem:COMMunicate:SERIal:COM1A:DTR? :SYSTem:COMMunicate:SERIal:COM1A:DTR <Boolean>

3-68 OTS9100 User Manual