Tektronix 071-0855-05 :SOURce:INSErt:DEFEct:MODE , , :SOURce:INSErt:DEFEct:STATe , :SOURce:INSErt:DEFEct:TIME

Reference: Remote Commands ~ Command Description
3-60 OTS9100 User Manual
:SOURce:INSErt:DEFEct:MODE
This command specifies how defects are inserted. The query form r eturns the current setting.
Syntax :SOURce<slot>:INSErt:DEFEct:MODE?
:SOURce<slot>:INSErt:DEFEct:MODE <Enum>
Parameters Description
NONE Defect insertion is disabled
BURSt A defect condition is asserted for a programmed time
CONTinuous A defect condition is asserted continously
:SOURce:INSErt:DEFEct:STATe
This query returns the current state of defect insertion.
Syntax :SOURce<slot>:INSErt:DEFEct:STATe?
Parameters Description
INACT Defect/anomaly insertion is inactive
SING_INACT One-time defect/anomaly insertion is inactive
SING_DWELL One-time defect/anomaly insertion is active
BRST_INACT Burst defect/anomaly insertion is inactive
BRST_ACT Burst defect/anomaly insertion is active, between bursts
BRST_DWELL Burst defect/anomaly insertion is active
CONT_INACT Continuous defect/anomaly insertion is inactive
CONT_ACT Continuous defect/anomaly insertion is inactive
CONT_DWELL Continuous defect/anomaly insertion is active
:SOURce:INSErt:DEFEct:TIME
This command sets the duration of timed defect insertion in the units appr opriate to the selected defect.
The query form returns the current value.
Syntax :SOURce<slot>:INSErt:DEFEct:TIME?
:SOURce<slot>:INSErt:DEFEct:TIME <NR1>