Tektronix 071-0855-05 SOURceDATAPATHTRACeVALUeSTRIng, SOURceDATAPAYLoadBACKgroundPATTern

Reference: Remote Commands ~ Command Description

:SOURce:DATA:PATH:TRACe:VALUe

This command sets the data byte values transmitted in the Path Trace (J1) byte of the Path Overhead. The data bytes are formatted as a standard IEEE-488 data block. The query form returns the current values.

Syntax: :SOURce<slot>:DATA:PATH:TRACe:VALUe? :SOURce<slot>:DATA:PATH:TRACe:VALUe <Block>

:SOURce:DATA:PATH:TRACe:VALUe:STRIng

This command sets the data byte values transmitted in the Path Trace (J1) byte of the Path Overhead. The data byte values are specified as an ASCII string. The query form returns the current values.

Syntax: :SOURce<slot>:DATA:PATH:TRACe:VALUe:STRIng? :SOURce<slot>:DATA:PATH:TRACe:VALUe:STRIng <String>

:SOURce:DATA:PAYLoad:BACKground:PATTern

This setting selects the background test pattern inserted as payload into the transmitted signal. The query form returns the current setting.

Syntax: :SOURce<slot>:DATA:PAYLoad:BACKground:PATTern? :SOURce<slot>:DATA:PAYLoad:BACKground:PATTern <Enum>

Parameters	Description
PRBS15A	ITU standard PRBS 2^15-1 pattern
PRBS15I	Inverted PRBS 2^15-1 pattern
PRBS23A	ITU standard PRBS 2^23-1 pattern
PRBS23I	Inverted PRBS 2^23-1 pattern
PRBS31A	ITU standard PRBS 2^31-1 pattern
PRBS31I	Inverted PRBS 2^31-1 pattern
ZEROs	Constant zero data
ONEs	Constant one data
USER	Constant 8-bit user-specified data
LIVE	Live data

3-52 OTS9100 User Manual