Manuals / Brands / Lawn and Garden / Telescope / Tektronix / Lawn and Garden / Telescope

Tektronix 071-0855-05 Transmitter Input and Output Specifications

1 253

Download 253 pages, 7.78 Mb

Specifications

OTS9100 User Manual A-9

Transmitter Input and Output Specifications

OTS91L4-15, OTS91L5-15 Signal Name: 9.95238 Gb/s Optical Output Data

Signal Rate: 9.95238 Gb/s ± 100ppm

Pulse Mask Compliance: GR-253 (SONET), G.957 (SDH)

Data Format: PN7 scrambled NRZ formatted data; in BERT mode, unframed and unscrambled

PRBS data

Wavelength: 1550 nm ± 6 nm

Average Power: ≥+3 dBm (minimum), +5 dBm (typical)

Extinction Ratio: ≥10 dB (minimum), 12 dB (typical)

Wavelength Aging Drift: +\- 0.01nm/yr

Sidemode Suppression: >30 dB

Chirp: α = 0 (nominal)

Optical Return Loss: > 30dB (minimum)

Eye Crossing: 50% (typical)

Connector: FC/PC (standard), SC or ST available

Optical Rise and Fall Time: ≤30 ps at 20%-80%

Optical Extinction for Continuos LOS insertion: > 30 dB

This output can be “locked out” for safety (as UL safety requirements specify) using the front panel

key switch or remote interlock.

Fiber Type: Single Mode

Modulator Type: Mach Zender/Lithium Niobate

Description: Primary output to device under test

OTS91L7, OTS91L8 Signal Name: 9.95238 Gb/s Optical Input

Wavelength: 1528 nm - 1565 nm

Average Power: 0dBm - +16dBm

Insertion Loss: < 7.5dB, 6.0dB typical

NOTE: There is a 3dB reduction in measured power with a 50% duty cycle modulated signal.

Optical Source Polarization Extinction: >14dB

Connector: FC/PC (standard), SC or ST available

Fiber Type: Input – Polarization-maintaining (PM) Panda type

Description: Optical input for external optical source

Contents

Main p pp p Page Warranty Page Table of Contents OTS9100 User Manual i Table of Contents Getting Started Operating Basics Table of Contents ii OTS9100 User Manual Reference Table of Contents OTS9100 User Manual iii Table of Contents iv OTS9100 User Manual Appendices General Safety Summary How to Avoid Fire or Personal Injury Page Safety Terms and Symbols Terms in this Manual Terms on the Product Symbols on the Product Page Preface How This Manual is Organized Conventions Getting Started Product Description OTS9100 Features and Capabilities: Page Accessories Standard with each shipment OTS91L4 Standard OTS91L5 Standard Page International Power Plug Options (Chassis Only) First Operation OTS9100 Installation Removing Cards Slot Positioning of OTS Cards Multiple Modules Page Module Card Interconnection Power On and Software Initialization Module Quick Check Page Emergency Startup Disk Shutdown and Power Off Module Operating Basics Front Panel Indicators and Connectors 10Gb/s Transceiver Optics Page Page Receive Analysis Module OK LOS DEFECT ANOMALY Rx Event OUT Rx Data IN Rx Clock OUT Transmit Generation Module OK Tx EVENT OUT F-SYNC OUT 622 MHz TRIG OUT Tx DATA OUT 10 GHz CLOCK IN Clock Trigger Module OK 155 MHz EXTERNAL CLOCK IN 10 GHz TRIG OUT Rx CLOCK IN Page Software Interface Operating Basics User Interface Operating Basics: User Interface 2-12 OTS9100 User Manual function Elements of the User Interface Figure 2-6: Location of Status and Navigation Windows displayed in a Single Mode View Category Title Bars for each Task Bar Menu Bar System View Device Window Help Tool Bar Laser Control Bar Test Control Bar Main Status Bar Client Lockout Jitter Error Page LED Window Module Signal Summary LED Panel Slot Signal LED Panel User Selected Signal LED Window Clear History Module LED Panel Operating Basics: User Interface OTS9100 User Manual 2-21 Table 2-1: Description of Status Window Virtual LED Indicators LED Display Selection Navigation Window Page Setup Property Menus Transmitter Signal Signal Standard BERT Mode Signal Source channel from 1 to 192 or set all. Timing Source Trigger Output Signal Structure Test Pattern Background Channels Signal Structure Test Pattern Transmitter Transport Overhead Edit Overhead Through Mode J0 Multi-Byte Trace Transmitter Path Overhead Edit Path Overhead Path Through Mode J1 Multi-Byte Trace Transmitter Error Insertion Anomaly Insertion Anomaly Insertion and Through Mode Defect Insertion Transmitter K1, K2 Decode Page Page Transmitter - IP Payload Page Transmitter - IP Error Insertion Page Receiver Signal Signal Standard BERT Mode Signal Structure Active Channel(s) Trigger Output Receiver Threshold Offset Receiver Trace Mismatch J0 Multi-Byte Trace J1 Multi-Byte Trace Edit C2 Byte Page HPPLM and HP Unequipped Detection Receiver IP Setup Setup - Summary Signal Monitor Menus Receiver Transport Overhead RS Trace (Section Trace) (J0) S1 Synchronization Status Receiver Path Overhead Path Trace (J1) C2 Status Page Receiver Payload Test Control Menu Page Test Control Summary Measurements Menu Receiver - Real-Time Page Receiver - Cumulative Page Receiver History Page Page Receiver IP Measurements Transmitter - IP Measurements Analysis Menu Analysis SONET/T1M1 Page Analysis SDH/G.826 Page APS Measurements Menu Page Page Remote Access Setups Select Server View Options Display Notation Server (System) Display Configuration System View SCPI Output Results Files Results File Management Page ResultsViewer Operation Opening files on the local computer Connecting to an OTS System Viewing results files Selecting and arranging windows Printing results data Configuring ResultsViewer Exporting test data to other programs Operating Basics: User Interface 2-92 OTS9100 User Manual Table 2-2: Sample output of data from a test results file Operating Basics: User Interface OTS9100 User Manual Page Record type codes Operating Basics: User Interface Sonet GR-253 (Line) Analysis Sonet GR-253 (Path) Analysis SDH G.826 (Regenerator Section) Analysis SDH G.826 (Multiplex Section) Analysis Operating Basics: User Interface OTS9100 User Manual History data Configuring the exported data OTS System Event Printer Application Starting the Event Printer program Logging Select Events Page Muting: Event Printer behavior with continuous events Minimizing the Event Printer window Configuring a printer in Windows Page Reference Commands Overview IEEE 488.2 System Commands Remote Control Setup and Format Commands Reference: Remote Commands ~ Commands Overview Remote Control Port Settings Remote Control Lockout These commands enable remote control lockout. System Configuration Queries Save and Restore System Settings System File Management System Signal Standard (OTS9100 module) Receiver Commands (OTS9100 module) Receiver Signal Measurement Commands (OTS9100 module) Receiver Signal Analysis Commands (OTS9100 module) Receiver Test Control (OTS9100 module) Reference: Remote Commands ~ Commands Overview OTS9100 User Manual 3-5 Transmitter Commands (OTS9100 module) These commands provide configuration and control of the transmitter settings. Syntax IEEE 488.2 Common Commands Description Command and Query Structure Block Format Hex Block Format SCPI Commands and Queries Command Format Query format Parameter types and formats Optional and alternative parameters Abbreviating Commands, Queries, and Parameters Controlling Responses to Queries Chaining Commands and Queries General Rules Slot Specifiers Command Description Page Reference: Remote Commands ~ Command Description 3-16 OTS9100 User Manual :SENSe:ANALysis:G826A:MS:FAR :SENSe:ANALysis:G826A:MS:FAR:ALL Reference: Remote Commands ~ Command Description OTS9100 User Manual 3-17 :SENSe:ANALysis:G826A:MS:NEAR :SENSe:ANALysis:G826A:MS:NEAR:ALL Syntax :SENSe<slot>:ANALysis:G826A:MS:NEAR:ALL? :SENSe:ANALysis:G826A:PATH:FAR :SENSe:ANALysis:G826A:PATH:FAR:ALL :SENSe:ANALysis:G826A:PATH:NEAR :SENSe:ANALysis:G826A:PATH:NEAR:ALL Reference: Remote Commands ~ Command Description :SENSe:ANALysis:G826A:RS :SENSe:ANALysis:G826A:RS:ALL :SENSe:ANALysis:GR253A:LINE:FAR :SENSe:ANALysis:GR253A:LINE:FAR:ALL :SENSe:ANALysis:GR253A:LINE:NEAR :SENSe:ANALysis:GR253A:LINE:NEAR:ALL :SENSe:ANALysis:GR253A:PATH:FAR :SENSe:ANALysis:GR253A:PATH:FAR:ALL Reference: Remote Commands ~ Command Description 3-22 OTS9100 User Manual :SENSe:ANALysis:GR253A:PATH:NEAR :SENSe:ANALysis:GR253A:PATH:NEAR:ALL Reference: Remote Commands ~ Command Description OTS9100 User Manual 3-23 :SENSe:ANALysis:GR253A:SECTion :SENSe:ANALysis:GR253A:SECTion:ALL :SENSe:ANALysis:PATH:HPPLM Reference: Remote Commands ~ Command Description :SENSe:ANALysis:PATH:HPPLM:GENEric :SENSe:ANALysis:PATH:HPUNEQ :SENSe:ANALysis:PATH:LABEl:EXPEcted :SENSe:ANALysis:PATH:TRACe:EXPEcted:TYPE :SENSe:ANALysis:PATH:TRACe:EXPEcted:VALUe :SENSe:ANALysis:PATH:TRACe:EXPEcted:VALUe:STRIng Reference: Remote Commands ~ Command Description 3-26 OTS9100 User Manual :SENSe:ANALysis:PATH:TRACe:TIM :SENSe:ANALysis:SECTion:TRACe:EXPEcted :SENSe:ANALysis:SECTion:TRACe:EXPEcted:TYPE :SENSe:ANALysis:SECTion:TRACe:EXPEcted:VALUe :SENSe:ANALysis:SECTion:TRACe:EXPEcted:VALUe:STRIng :SENSe:ANALysis:SECTion:TRACe:TIM :SENSe:DATA:AUTOscan:STRUcture Reference: Remote Commands ~ Command Description :SENSe:DATA:CHANnel :SENSe:DATA:IP:PAYLoad:PATTern :SENSe:DATA:IP:PAYLoad:PATTern:UDATA :SENSe:DATA:PATH:TRACe:TYPE :SENSe:DATA:PATH:TRACe:VALUe :SENSe:DATA:PATH:TRACe:VALUe:STRIng :SENSe:DATA:PAYLoad:PATTern Reference: Remote Commands ~ Command Description :SENSe:DATA:PAYLoad:PATTern:UDATA :SENSe:DATA:POH:ALL :SENSe:DATA:POH:BYTE :SENSe:DATA:POH:BYTE:C2A :SENSe:DATA:POS:SCRambling Page Reference: Remote Commands ~ Command Description 3-32 OTS9100 User Manual :SENSe:DATA:SPE:STUFfing :SENSe:DATA:STRUcture :SENSe:DATA:TOH:STM1A:ALL :SENSe:DATA:TOH:STS1A:ALL :SENSe:INPUt:THREshold :SENSe:INPut:THReshold:LOS :SENSe:MEASure:APSTime:CONDition Reference: Remote Commands ~ Command Description 3-34 OTS9100 User Manual :SENSe:MEASure:APSTime:DETEcted :SENSe:MEASure:APSTime:MAXTime :SENSe:MEASure:APSTime:RUN :SENSe:MEASure:APSTime:STATus Reference: Remote Commands ~ Command Description :SENSe:MEASure:APSTime:THREshold :SENSe:MEASure:APSTime:VALUe :SENSe:MEASure:HDLC:FRAMes :SENSe:MEASure:HDLC:FRAMes:ALL :SENSe:MEASure:HDLC:BYTes :SENSe:MEASure:IP:PACKets :SENSe:MEASure:IP:PACKets:ALL :SENSe:MEASure:LINE:WINDow :SENSeMEASure:LINE:WINDow:ALL :SENSe:MEASure:PATH:CUMUlative Reference: Remote Commands ~ Command Description 3-38 OTS9100 User Manual :SENSe:MEASure:PATH:CUMUlative:ALL :SENSe:MEASure:PATH:WINDow :SENSe:MEASure:PATH:WINDow:ALL Reference: Remote Commands ~ Command Description OTS9100 User Manual 3-39 :SENSe:MEASure:SECTion:CUMUlative :SENSe:MEASure:SECTion:CUMUlative:ALL :SENSe:MEASure:SECTion:WINDow Page Reference: Remote Commands ~ Command Description OTS9100 User Manual 3-41 :SENSe:OPTical:THReshold:AUTO :SENSe:OVERhead:MONItor:CHANnel :SENSe:SIGNal:STANdard Reference: Remote Commands ~ Command Description :SENSe:STATus:LEDS :SENSe:STATus:LEDS:HEXadecimal :SENSe:STATus:LEDS:NUMEric :SENSe:STATus:PATH:LEDS :SENSe:STATus:PATH:LEDS:HEXadecimal :SENSe:STATus:PATH:LEDS:NUMEric :SENSe:TEST:DESCription :SENSe:TEST:MODE :SENSe:TEST:STATe :SENSe:TEST:TIME Reference: Remote Commands ~ Command Description :SENSe:TEST:TIME:ELAPsed :SENSe:TRIGger:MODE :SOURce:CLOCk:SOURce :SOURce:DATA:BACKground:STRUcture :SOURce:DATA:CHANnel :SOURce:DATA:CHANnel:REPLicate :SOURce:DATA:HDLC:IFRame:GAP :SOURce:DATA:IP:HEADer:ADDRess:DEST :SOURce:DATA:IP:HEADer:ADDRess:SOURce :SOURce:DATA:IP:HEADer:FLAG :SOURce:DATA:IP:HEADer:FRAG:OFFSet :SOURce:DATA:IP:HEADer:ID :SOURce:DATA:IP:HEADer:PROTocol :SOURce:DATA:IP:HEADer:PSIZe :SOURce:DATA:IP:HEADer:TSERVice :SOURce:DATA:IP:HEADer:TTLive :SOURce:DATA:IP:HEADer:VERSion :SOURce:DATA:IP:PAYLoad:PATTern :SOURce:DATA:IP:PAYLoad:PATTern:UDATa :SOURce:DATA:IP:STReam:INDEX :SOURce:DATA:IP:TRAFfic :SOURce:DATA:POS:SCRambling :SOURce:DATA:OVERhead:PASSthru Reference: Remote Commands ~ Command Description :SOURce:DATA:OVERhead:PASSthru:ALL :SOURce:DATA:PARIty:LOOP :SOURce:DATA:PATH:OVERhead:PASSthru Reference: Remote Commands ~ Command Description :SOURce:DATA:PATH:OVERhead:PASSthru:ALL :SOURce:DATA:PATH:TRACe :SOURce:DATA:PATH:TRACe:TYPE Reference: Remote Commands ~ Command Description 3-52 OTS9100 User Manual :SOURce:DATA:PATH:TRACe:VALUe :SOURce:DATA:PATH:TRACe:VALUe:STRIng :SOURce:DATA:PAYLoad:BACKground:PATTern Reference: Remote Commands ~ Command Description OTS9100 User Manual 3-53 :SOURce:DATA:PAYLoad:BACKground:PATTern:UDATA :SOURce:DATA:PAYLoad:PATTern :SOURce:DATA:PAYLoad:PATTern:UDATA Reference: Remote Commands ~ Command Description 3-54 OTS9100 User Manual :SOURce:DATA:POH:ALL :SOURce:DATA:POH:BACKground:BYTE:C2A :SOURce:DATA:POH:BYTE :SOURce:DATA:POH:BYTE:C2A :SOURce:DATA:POH:DEFAult :SOURce:DATA:RATE :SOURce:DATA:SECTion:TRACe :SOURce:DATA:SECTion:TRACe:VALUe :SOURce:DATA:SECTion:TRACe:VALUe:STRIng :SOURce:DATA:SOURce :SOURce:DATA:SPE:BACKground:STUFfing :SOURce:DATA:SPE:STUFfing :SOURce:DATA:STRUcture :SOURce:DATA:TOH:STS1A:ALL :SOURce:DATA:TOH:STS1A:BYTE Reference: Remote Commands ~ Command Description :SOURce:DATA:TOH:STS1A:DEFAult :SOURce:INSErt:ANOMaly:MODE :SOURce:INSErt:ANOMaly:RATE :SOURce:INSErt:ANOMaly:REPLicate:B2A :SOURce:INSErt:ANOMaly:STATe :SOURce:INSErt:ANOMaly:TYPE :SOURce:INSErt:DEFEct:MODE :SOURce:INSErt:DEFEct:STATe :SOURce:INSErt:DEFEct:TIME :SOURce:INSErt:DEFEct:TIME:RANGe :SOURce:INSErt:DEFEct:TYPE :SOURce:INSert:IP:ANOMaly:MODE :SOURce:INSert:IP:ANOMaly:RATE :SOURce:INSert:IP:ANOMaly:RATE:RANGe :SOURce:INSert:IP:ANOMaly:TYPE :SOURce:MEASure:HDLC:BYTes Reference: Remote Commands ~ Command Description :SOURce:MEASure:HDLC:FRAMes :SOURce:MEASure:HDLC:FRAMes:ALL :SOURce:MEASure:IP:PACKets :SOURce:OUTPut:LASer:INFO:OPTion :SOURce:OUTPut:LASer:INFO:SERial :SOURce:OUTPut:LASer:INFO:WAVelength :SOURce:OUTPut:LASER:INTERlock :SOURce:SIGNal:STANdard :SOURce:TRIGger:MODE :STATus:PRESet :SYSTem:COMMunicate:GPIB:PRIMary :SYSTem:COMMunicate:NETWork:ECHO :SYSTem:COMMunicate:NETWork:IPPORT :SYSTem:COMMunicate:NETWork:PROMpt :SYSTem:COMMunicate:NETWork:RXTERM :SYSTem:COMMunicate:NETWork:TXTERM :SYSTem:COMMunicate:PORT:ECHO :SYSTem:COMMunicate:PORT:PROMpt :SYSTem:COMMunicate:PORT:RXTERM :SYSTem:COMMunicate:PORT:TXTERM :SYSTem:COMMunicate:SERIal:COM1A:DTR Reference: Remote Commands ~ Command Description OTS9100 User Manual 3-69 :SYSTem:COMMunicate:SERIal:COM1A:ECHO :SYSTem:COMMunicate:SERIal:COM1A:ENABle :SYSTem:COMMunicate:SERIal:COM1A:FLOW Reference: Remote Commands ~ Command Description :SYSTem:COMMunicate:SERIal:COM1A:NDATA :SYSTem:COMMunicate:SERIal:COM1A:NSTOP :SYSTem:COMMunicate:SERIal:COM1A:PARIty :SYSTem:COMMunicate:SERIal:COM1A:PROMpt :SYSTem:COMMunicate:SERIal:COM1A:RATE :SYSTem:COMMunicate:SERIal:COM1A:RTS :SYSTem:COMMunicate:SERIal:COM1A:TXTERM :SYSTem:COMMunicate:SERIal:COM2A:DTR :SYSTem:COMMunicate:SERIal:COM2A:ECHO :SYSTem:COMMunicate:SERIal:COM2A:ENABle Reference: Remote Commands ~ Command Description :SYSTem:COMMunicate:SERIal:COM2A:FLOW :SYSTem:COMMunicate:SERIal:COM2A:NDATA :SYSTem:COMMunicate:SERIal:COM2A:NSTOP Reference: Remote Commands ~ Command Description 3-74 OTS9100 User Manual :SYSTem:COMMunicate:SERIal:COM2A:PARIty :SYSTem:COMMunicate:SERIal:COM2A:PROMpt :SYSTem:COMMunicate:SERIal:COM2A:RATE Page Page Page Reference: Remote Commands ~ Command Description 3-78 OTS9100 User Manual :SYSTem:FILEs:MGMT:RESUlts:ENABle :SYSTem:FILEs:MGMT:RESUlts:INTErval :SYSTem:FILEs:MGMT:RESUlts:PERcent Page Page :SYSTem:VERBose *TST Page Specifications Environmental Specifications Temperature Ranges Humidity Ranges Dimensions Transmitter Specifications Clock Source Signal Generation Internal Mode Through Mode Internal Payload Structures Active Channel Background Channel Test Patterns Overhead Manipulation Specifications Error Injection Defect/ Alarm Generation Receiver (Analyzer) Specifications Measurements Alarms Detection Overhead Display Transmitter Input and Output Specifications OTS91L4-15, OTS91L5-15 Signal Name: 9.95238 Gb/s Optical Output Data OTS91L7, OTS91L8 Signal Name: 9.95238 Gb/s Optical Input OTS91L7, OTS91L8 Signal Name: 9.95238 Gb/s Optical Output Data OTS91L4-13, OTS91L5-13 Signal Name: 9.95238 Gb/s Optical Output Data Frame Sync Output Event Trigger Output Page RX Clock Input 10 GHz Clock Output Receiver Input and Output Specifications OTS91L4, OTS91L6, OTS91L7 Signal Name: 9.95238 Gb/s Optical Input Data Event Trigger Output RX Clock Output RX Data Input Module Interconnect Specifications Signal Name: Tx Data Out / Tx Data In Signal Name: Rx Data Out / Rx Data In Signal Name: Rx Data Out / 10GHz/s Data In Signal Name: Rx Clock Out / Rx Clock In Certifications and Compliance Laser Safety CE Mark Compliance EMC Compliance Directive Appendix B Optical1Card Front Panel Descriptions 10 Gb/s TRANSCEIVER OPTICS CARD (L4-15, L4-13) Module OK Page Page 10 Gb/s TRANSMIT-ONLY OPTICS CARD (L5-15, L5-13) Module OK Optical OUT Page 10Gb/s OPTICAL RECEIVE-ONLY (L6) Module OK Optical IN Rx DATA OUT 10Gb/s OPTICAL TRANSCEIVER INTERFACE / EXTERNAL LASER (L7) Module OK Optical OUT External Laser IN Tx Data IN Optical IN Rx DATA OUT 10Gb/s OPTICALTRANSMIT ONLY/ EXTERNAL LASER (L8) Module OK Optical OUT External Laser IN Tx Data IN Emergency Startup Disk Accessing Help Files Page List of Acronyms Page Module Card Replacement Page Installing the Software Page Appendix Illustrations of cabled OTS9100 module Page OTS9200 and OTS92S1 User Manual Index-1 INDEX 1 155MHz Clock Out 2-10 2 E Jitter Hybrid, Rx 2-2 Event Printer 2-55 F FAS P Printing Results data 2-46 Q R Rx icons 2-21,28 U V W