Tektronix 071-0855-05 SOURceDATATOHSTS1ADEFAult, SOURceINSErtANOMalyMODE, SOURceINSErtANOMalyRATE

Reference: Remote Commands ~ Command Description

:SOURce:DATA:TOH:STS1A:DEFAult

This command sets all bytes in the generated STS-1 #1 Transport Overhead data to their default values. Syntax :SOURce<slot>:DATA:TOH:STS1A:DEFAult

:SOURce:INSErt:ANOMaly:MODE

This command specifies how anomalies are inserted. The query form returns the current setting.

Syntax :SOURce<slot>:INSErt:ANOMaly:MODE? :SOURce<slot>:INSErt:ANOMaly:MODE <Enum>

Parameter	Description
NONE	Anomaly insertion is disabled
SINGle	A single anomaly is inserted
BURSt	A burst of anomalies is inserted

:SOURce:INSErt:ANOMaly:RATE

This command sets the rate at which continuously-generated anomalies are inserted. The query form returns the current value.

Syntax :SOURce<slot>:INSErt:ANOMaly:RATE? :SOURce<slot>:INSErt:ANOMaly:RATE <NR3>

:SOURce:INSErt:ANOMaly:RATE:RANGe

This query returns the minimum and maximum rate values for the specified anomaly type. Syntax :SOURce<slot>:INSErt:ANOMaly:RATE:RANGe? <Enum>

Parameters	Description
NONE	No anomaly is selected
B1BIP	B1 parity errors
B2BIP	B2 parity errors
B3BIP	B3 parity errors
REI	Line REI errors
REI_P	Path REI errors
PATTern	Pattern bit errors
RANDom	Errors in randomly-selected framing, overhead, and payload bits
BIT_SPE	Errors in randomly-selected SPE bits (SONET mode only)
BIT_VC	Errors in randomly-selected VC bits (SDH mode only)

3-58 OTS9100 User Manual