Texas Instruments SM320C6455-EP RSV13, RSV14, RSV15, RSV16, RSV17, RSV18, RSV19, RSV20, RSV23

SM320C6455-EP

FIXED-POINT DIGITAL SIGNAL PROCESSOR

www.ti.com

SPRS462B – SEPTEMBER 2007 – REVISED JANUARY 2008

		Table 2-3. Terminal Functions		(continued)
SIGNAL		TYPE(1)	IPD/IPU(2)	DESCRIPTION
NAME	NO.
			Reserved. This pin must be connected to ground (VSS) via a 200-Ωresistor for
			proper device operation.
			NOTE: If the RGMII mode of the EMAC is not used, the DVDD15, VREFHSTL,
RSV13	F2		RSV13, and RSV14 pins can be connected to directly ground (VSS) to save
			power. However, connecting these pins directly to ground prevents
			boundary-scan from functioning on the RGMII pins of the EMAC. To preserve
			boundary-scan functionality on the RGMII pins, see Section 7.3.4.
			Reserved. This pin must be connected to the 1.5/1.8-V I/O supply (DVDD15) via
			a 200-Ωresistor for proper device operation.
			NOTE: If the RGMII mode of the EMAC is not used, the DVDD15, VREFHSTL,
RSV14	F1		RSV13, and RSV14 pins can be connected to directly ground (VSS) to save
			power. However, connecting these pins directly to ground prevents
			boundary-scan from functioning on the RGMII pins of the EMAC. To preserve
			boundary-scan functionality on the RGMII pins, see Section 7.3.4.
			Reserved. This pin must be connected via a 39-Ωresistor directly to ground
RSV15	T1		(VSS) for proper device operation. The resistor used should have a minimal
			rating of 1/10 W.
			Reserved. This pin must be connected via a 20-Ωresistor directly to 3.3-V I/O
RSV16	T2		Supply (DVDD33) for proper device operation. The resistor used should have a
			minimal rating of 1/10 W.
RSV17	AE21	A
RSV18	E13	A
RSV19	F18	A
RSV20	U29	A
RSV21	A6	A
RSV22	B26	O
RSV23	C26	O
RSV24	B6	O
RSV25	C6	O
RSV26	AJ11	A	Reserved. (Leave unconnected, do not connect to power or ground.)
RSV27	AH11	A
RSV36	AD11	I/O/Z	IPU
RSV37	AD9	I/O/Z	IPU
RSV38	AG10	I/O/Z	IPU
RSV39	AG11	I/O/Z	IPU
RSV40	AJ12	I/O/Z	IPU
RSV41	W28	O/Z	IPU
RSV42	Y26	O/Z	IPU
RSV43	Y25	O/Z	IPU
RSV44	Y27	O/Z
RSV28	N7	A
RSV29	N6	A	Reserved. These pins must be connected directly to VSS for proper device
RSV30	P23	A	operation.
RSV31	P24	A
RSV32	D25		Reserved. This pin must be connected to the 1.8-V I/O supply (DVDD18) via a
			1-kΩresistor for proper device operation.
RSV33	C25		Reserved. This pin must be connected directly to ground for proper device
			operation.
RSV34	E6		Reserved. This pin must be connected to the 1.8-V I/O supply (DVDD18) via a
			1-kΩresistor for proper device operation.
RSV35	D6		Reserved. This pin must be connected directly to ground for proper device
			operation.
Submit Documentation Feedback				Device Overview	45