Toshiba B-SX8T manual 8RTC SET Time H, 8RTC SET Time M, 8RTC SET Time S, 8RTC SET LOW BATT. Check

3. ON LINE MODE

EO13-33002

3.7 Real Time Clock (RTC) Setting

(Continued from the previous page)

		[PAUSE]
	<8>RTC SET
	TIME H	00/00/00
Hour
		[PAUSE]
	<8>RTC SET
	TIME M	10/00/00
		[PAUSE]
	<8>RTC SET
	TIME S	10/30/00

[PAUSE]

[FEED]

[RESTART]

Minute

[FEED]

[RESTART]

Second

[FEED]

[RESTART]

Pressing the [PAUSE] key enables setting the Hour.

Set the Hour with the [FEED] or [RESTART] key. Pressing the [PAUSE] key fixes the Hour and cause the cursor to move to the Minute.

Set the Minute with the [FEED] or [RESTART] key. Pressing the [PAUSE] key fixes the Minute and cause the cursor to move to the Second.

Set the second with the [FEED] or [RESTART] key. Press the [PAUSE] key to fix the Second. Then, the Low Battery Check selection screen is displayed.

<8>RTC SET

LOW BATT. CHECK

[PAUSE]

<8>RTC SET

LOW BATT. OFF

[PAUSE]

<8>RTC SET RENEWAL

[PAUSE]

[FEED]

[RESTART]

Pressing the [PAUSE] key enables choosing whether to activate the low battery check function or not. Set the function to ON or OFF with the [FEED] or [RESTART] key.

ON: Low battery check function is activated.

OFF: Low battery check function is not activated. (Default)

Press the [PAUSE] key to fix the setting. Then, the RTC Data Renewal Timing setting screen is displayed.

Pressing the [PAUSE] key enables choosing the RTC data renewal timing.

Choose PAGE or BATCH with the [FEED] or [RESTART] key.

<8>RTC SET	[FEED]
RENEWAL	BATCH [RESTART]

[PAUSE]

<8>RTC SET

DATE 06/03/01

Press the [FEED] and [RESTART] keys at the same time to return to “<8>RTC SET” display.

<8>RTC SET

PAGE: A real time can be printed on each media. However, the printer needs to stop the motion before printing each media to read the real time clock data.

BATCH: Batch print is possible. However, the same time is printed on the all media issued in a batch because the real time clock data is read only for the first media.

Press the [PAUSE] key to fix the setting. Then, the current date is displayed.

NOTES:

1.Be sure to load the battery and set the low battery check function to ON whenever the real time clock is used. If the battery is not loaded or the battery voltage is low, the real time clock data is erased at the power off time.

2.When the low battery check function is set to ON, the printer stops at the power on time due to a “LOW BATTERY” error if the battery voltage is 1.9V or less. As a restart is invalidated in this case, hold down the [RESTART] key to cause the printer to enter <1>RESET mode, access the Real Time Clock setting mode, and set the low battery function to OFF.

3-13