Toshiba B-SX8T, B-SX6T manual Self-Diagnostic Test and Result Print Out, Print Sample

2. SYSTEM MODE

EO13-33002

(Revision Date: Jul. 24, 2008)

2.1 Self-diagnostic Test

2.1.4 Self-Diagnostic Test and Result Print Out

When the Maintenance Counter/Parameter Settings is printed, the message returns to “<1>DIAG. Vx.x”. Press the [PAUSE] key twice.

The Self-Diagnostic Test is ready. Press the [PAUSE] key to start.

<1>DIAG. Vx.x

AUTO DIAGNOSTIC

The printer starts a self-diagnosis, and prints out the result. During printing, the message below appears on the display.

<1>DIAG. Vx.x

CHECKING & PRINT

After printing is completed, the display returns to “<1>DIAG. Vx.x”.

NOTE: If an error occurs, an error message appears, the printer stops printing. After clearing the error, press the [PAUSE] key to return the display to “<1>DIAG.Vx.x”. The printer does not restart printing automatically.

• Print Sample	(1)	PROGRAM	B-SX8T
		MAIN	15OCT2005 V1.0A: 1A00
		BOOT	20SEP2005 V1.0: 8500
	(2)	FONT	AD00
	(3)	KANJI	GOTHIC :9F00
			MINCHO :7400
	(4)	EEPROM	OK
	(5)	SDRAM	16MB
	(6)	SENSOR1	00000000, 00000111
	(7)	SENSOR2	[H]23°C	[A]22°C
			[R]4.2V	[T]2.5V
	(8)	PE LV.	[R]1.2V	[T]4.3V
	(9)	M THRE.	[R]5.0V	[T]5.0V
			[RANK]1 305DPI
	(10)	EXP.I/O	NG
	(11)	EX.232C	NG
	(12)	SIO	NG NG
	(13)	STRIP	NG
	(14)	RFID	OK #00RV972 (EU0)

NOTES: 1. Print conditions: Print speed: 4”/sec., Sensor: No sensor, Printing method: Thermal transfer/Direct thermal(*1), Media length: 87 mm, Issue mode: Batch printing

(*1) Depends on the printing mode setting.

2.Software version No., Part No. of ROM and checksum vary according to the software version of PROGRAM ROM.

3.The last two digits of the checksum are usually “00”.

4.When Kanji ROM is not installed, the checksum becomes “0000”.

5.The symbol “°” of “°C” may not be printed depending on the type of character code.

2-11