Toshiba B-SX6T, B-SX8T manual „ Outline of Automatic Threshold Setting

3. ON LINE MODE

EO13-33002

3.1 Automatic Threshold Setting

3.1 Automatic Threshold Setting

„Outline of Automatic Threshold Setting

To maintain a constant print position the printer uses the media sensor to detect a print start position according to the difference of voltage between a print area and a gap or black mark. When the media is pre-printed, the darker (or more dense) inks can interfere with this process, causing “PAPER JAM” errors even if the media is not actually jammed.

To get around this problem, first, try an automatic threshold setting.

If the problem still occurs, then, the threshold voltage needs to be manually set. (Refer to Section 2.3.7.)

„How to Perform an Automatic Threshold Setting

ON LINE

B-SX8T Vx.x

Load pre-printed media in the printer.

[PAUSE]

PAUSE

B-SX8T Vx.x

Press and hold the [PAUSE] key for 3 seconds or longer.

	TRANSMISSIVE		[FEED]		REFLECTIVE
	B-SX8T	Vx.x	[RESTART]		B-SX8T		Vx.x
Press and hold		the [PAUSE]	Press and hold		the [PAUSE]
key until more than 1.5 labels				key until more than 1.5 labels
	(tags) have been fed.				(tags) have been fed.

PAUSE

B-SX8T Vx.x

[RESTART]

ON LINE

B-SX8T Vx.x

During this media feed, a threshold is automatically set.

NOTES: 1. Failure to feed more than 1.5 labels may result in an incorrect threshold setting. 2. While the Top Cover is raised, the [PAUSE] key does not work.

3- 4