Toshiba B-SX6T 2 Cut/Strip Position Fine Adjustment, Example of Cut Position Fine Adjustment

2. SYSTEM MODE

EO13-33002

2.3 Printer Parameter Fine Adjustment

2.3.2 Cut/Strip Position Fine Adjustment

This parameter is to fine adjust a cut or strip position.

When “<3>ADJUST SET” appears, press the [PAUSE] key twice.

<3>ADJUST SET CUT ADJ. +0.0mm

Use the [FEED] or [RESTART] key to select a desired option. (Range: -50.0 mm to +50.0 mm)

[RESTART]

[FEED]

[FEED] key: [RESTART] key:

CUT ADJ.+50.0mm

CUT ADJ.+49.9mm

CUT ADJ.+0.1mm

CUT ADJ.+0.0mm

CUT ADJ.-0.1mm

CUT ADJ.-49.1mm

CUT ADJ.-50.0mm

Pressing the [FEED] key one time causes a –0.1 mm change, up to –50.0 mm. Pressing the [RESTART] key one time causes a +0.1 mm change, up to +50.0 mm.

After completing the fine adjustment, press the [PAUSE] key.

• Example of Cut Position Fine Adjustment

When setting +3.0 mm

Compared with “+0.0 mm” position, the cut position is shifted forward.

Feed Direction

3mm

When setting +0.0 mm

Feed Direction

Cut Position

Cut Position

3mm

When setting –3.0 mm

Compared with “+0.0 mm” position, the cut position is shifted backward.

Feed Direction

Cut Position

NOTES: 1. Cut issue is available only when the optional cutter unit (B-SX208-QM-R) is installed.

2.The fine adjustment value equals to the sum of the fine adjustment values set by the PC command and this parameter.

The maximum cut position fine adjustment value is +50.0 mm. When the value reached the maximum, the value remains unchanged even if the subsequent fine adjustment is performed.

2-38