Toshiba B-SX8T, B-SX6T manual Outline of the Rfid Module Setting

2. SYSTEM MODE

EO13-33002

(Revision Date: Jul. 24, 2008)

2.9 RFID Module Setting

2.9RFID Module Setting

Outline of the RFID Module Setting

In the RFID Module Setting mode, you can set various parameters related to the RFID module. It is necessary to set these parameters before operating the RFID module.

If a read or write error occurs frequently, adjust the values for the parameters.

The RFID Module Setting menu contains the following:

<10>RFID

[PAUSE]

<10>RFID
READ TEST				OFF
		[PAUSE]
	<10>RFID
	MODULE		NONE
		[PAUSE]
	<10>RFID
	TAG NONE
		[PAUSE]
	<10>RFID
	ERR CHK		OFF
		[PAUSE]
	<10>RFID
	ISSUE RETRY			3
		[PAUSE]
<10>RFID
R CYCLE CNT				5
		[PAUSE]
<10>RFID
R CYCLE TIM				4.0

[PAUSE]

RFID read test

RFID module type

RFID tag type

RFID error tag detection

Maximum number of issue retries

Maximum number of read retries

Read retry time-out

<10>RFID
W CYCLE CNT		5
	[PAUSE]
<10>RFID
W CYCLE TIM		2.0
	[PAUSE]
<10>RFID
ADJ RETRY		+00

[PAUSE]

<10>RFID

POWER LEVEL 18

[PAUSE]

<10>RFID

AGC THRESHOLD 0

[PAUSE]

<10>RFID
Q VALUE		2
	[PAUSE]
<10>RFID
WT AGC		11
	[PAUSE]
<10>RFID
WT MIN AGC		11

[PAUSE]

Maximum number of write retries

Write retry time-out

RFID adjustment for retry

Radio output power level setting

RFID AGC threshold setting

RFID Module Q Value Setting

AGC threshold for data write setting

AGC threshold lower limit for retry setting

2-73