Toshiba B-SX8T, B-SX6T manual LCD Language Selection, Auto Forward Wait Selection

2. SYSTEM MODE

EO13-33002

2.2 Parameter Setting

2.2.8 LCD Language Selection

This parameter is to choose a language in which the LCD message is displayed.

When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.

<2>PARAMETER SET LCD ENGLISH

Use the [FEED] or [RESTART] key to select a desired option.

[RESTART]

[FEED]

ENGLISH

ITALIAN

JAPANESE

SPANISH

DUTCH

FRENCH

GERMAN

After selecting a language, press the [PAUSE] key.

2.2.9 Auto Forward Wait Selection

This parameter is to choose whether to activate the Auto Forward Wait function or not.

This function, used in the cut mode, automatically feeds the media forward for about 14 mm if there is more than 1-second idle time after printing, to prevent the top edge of the media from curling.

When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.

<2>PARAMETER SET FORWARD WAIT OFF

Use the [FEED] or [RESTART] key to select a desired option.

[RESTART]

[FEED]

FORWARD WAIT ON

FORWARD WAIT OFF

Activated

Not activated

When ON is selected, pressing the [PAUSE] key will result that the LCD Message Display shows the stop position fine adjustment value setting screen.

<2>PARAMETER SET POSITION +0.0mm

[RESTART]

[FEED]

POSITION +5.0mm

POSITION +0.0mm

POSITION -5.0mm

[FEED] key: Pressing the [FEED] key one time causes a –0.1 mm change, up to –5.0 mm.

[RESTART] key: Pressing the [RESTART] key one time causes a +0.1 mm change, up to +5.0 mm. After selecting an auto forward wait, press the [PAUSE] key.

2-23