Toshiba B-SX6T, B-SX8T manual Basic

2. SYSTEM MODE				EO13-33002
				(Revision Date: Mar. 26, 2009)
				2.1 Self-diagnostic Test
	Item	#	Description	Specification
	BASIC	(61)	BASIC interpreter setting	ON: Available
				OFF: Unavailable
	BASIC TRACE	(62)	BASIC interpreter trace setting	ON: Available
				OFF: Unavailable
	DHCP	(63)	DHCP function setting	ON: Available
				OFF: Unavailable
	DHCP ID	(64)	DHCP ID setting	Max. 16 characters
	DHCP HOST NAME	(65)	DHCP host name	Max. 16 characters
	RTC BATT. CHK	(66)	RTC Low Battery Check setting	ON: Available
				OFF: Unavailable
	RTC RENEWAL	(67)	RTC data renewal timing	BATCH: per batch
				PAGE: per page
	RFID MODULE	(68)	RFID module type	NONE: No RFID kit is installed.
				U2: U2 B-SX708-RFID-U2-EU-R,
				B-SX708-RFID-U2-CN-R
	RFID TAG TYPE	(69)	RFID tag type	NONE: 11
				EPC C1 Gen2: 24
	RFID ERR CHECK	(70)	RFID error tag detection	ON: An error tag detection is performed.
				OFF: An error tag detection is not
				performed.
	RFID RETRY	(71)	Maximum number of RFID issue retries	0 to 255
	RFID RD CYCLE	(72)	Maximum number of RFID read retries	0 to 255
			RFID read retry time-out	0 sec. to 9.9 sec.
	RFID WT CYCLE	(73)	Maximum number of RFID write retries	0 to 255
			RFID write retry time-out	0 sec. to 9.9 sec.
	RFID ADJ RETRY	(74)	RFID adjustment for retry	-99 mm to +99 mm
	RFID POWER LEV	(75)	RFID wireless power level setting	9 to 18
	RFID AGC THR.	(76)	RFID AGC Threshold Setting	0 to 15
	RFID Q VAL	(77)	RFID Q VAL (Q value)	0 to 5
	RFID WT AGC	(78)	RFID WT AGC (AGC threshold for data write)	0 to 15
	RFID WT AGC MIN	(79)	RFID WT MIN AGC (AGC threshold lower limit for retry)	0 to 15

2- 10